Page 1 of 1

1960 4X4 Speedometer Cable Replacement

Posted: June 3, 2010, 8:38 am
by montego69
Hi all,

During my truck's restoration I noticed the speedometer cable is twisted off. My 1962 4X4 drivetrain's speedo cable is attached to the transfer case which makes it super-long. I see Mac's sells a universal cable kit that is 70" long. This is still a little short. Do any of you guys have a source for longer internal cables? If need be, for whatever reason, I can replace both the outer jacket and inner cable but inner cable only is preferred.

Thanks,

Nick

Posted: June 3, 2010, 8:57 am
by 36truck
Napa or a good parts store should be able to get you a 120" long core.

Posted: June 3, 2010, 6:54 pm
by Roger Carter
Any speedometer service shops in your neighborhood? Most can build whatever you need. The last custom built cable I had made ran about $40.00.

Roger Carter

Speedo Repair

Posted: June 8, 2010, 11:26 am
by montego69
Thanks guys. I'll do some searching and will be back if my local parts places come up with nothing.
Thanks again,
Nick

Posted: June 8, 2010, 8:20 pm
by Anthony
Nick, If you find something let us know.... I will be looking for something to work on mine also...

Speedo Cable Found

Posted: June 10, 2010, 10:01 am
by montego69
I called my local Bumper To Bumper car parts store and found that they have both 84" and 120" cables in stock. The 120 inch cable was a whole $9.00! It comes with a little tool to crimp the end on after you cut it to length.
Later,

Nick

Parts Number

Posted: June 22, 2010, 8:14 am
by montego69
Guys,

I wrote down the speedo core kit info in case anyone needed it.

Mfg: ATP Professional Auto parts
Description: 120" speedometer cable core kit
Part Number: YC-101

I had to cut off about 10" to make it the correct size.
On a side note, I even cut twice and the first one I bought still ended up being too short... Must have been one of those days... Good thing they're only 9 bucks. Haha.

Nick