Page 1 of 2

Hi From an Aussie Newbie

Posted: August 27, 2010, 6:26 pm
by Hillchaser
Hi all,

Love this forum. Have been following it for some time.

I'm desperate to get a slick... I'm an IT guy and have no fabrication skills (would love to start learning) but I've infected with the 'slick disease'. I'm currently think about bringing a driveable slick over from the US and then gradually paying a local rod shop to gradually work it up as I have funds. I would like to get the running gear and drive train up to speed and run it as a rat rod until I can afford a nice paint job. The other option would be to pay slighlty more and wait for a good deal where someone has already put a lot of money into a build.

Would love to hear your thoughts. Or even if anyone has a slick they would be interested in parting with.

Posted: August 27, 2010, 6:51 pm
by Anthony
welcome to the Slickness from West Virginia.... the best thing to do is to buy what you can afford and enjoy it all you can.... a driving slick is the best...

Posted: August 27, 2010, 7:17 pm
by Brian Taylor
I would try and find one there, the cost to convert to right hand drive is fairly high. Find one there that is already a righty. If you have not already talk with Alan he has had slicks and is familiar with them. I do not know if you and him have met or if you are even anywhere close to where he lives in Australia. It is good to have a knowledgable friend with similar interests and Alan seems to be quite talented with Slicks.
And as said before buy the best you can afford and go from there.
Enjoy and welcome from Dallas, Texas

Posted: August 27, 2010, 8:59 pm
by tray
Welcome from Ga. Good luck with your slick disease. Get what you can and have fun.

Posted: August 27, 2010, 9:28 pm
by jakdad
Welcome from Texas! Alan is your go to guy!
Good luck,
Jim
:lol: :lol: :lol:

Posted: August 27, 2010, 10:44 pm
by don morris II
welcome from michigan welcome.gif

Posted: August 27, 2010, 11:50 pm
by DukeRoche
welcome.gif from NW Pennsylvania. I'm an ameatur mechanic myself (and I stress the word ameatur). My advice would be this. It was my lifetime dream to own a Slick and fix it up as best as possible. I went cheap and bought a non-running 64. Although I love working on it (especially when something goes right) I wish now I would have spent a bit more money on something that didn't require so much attention to get it road worthy. I will tell you though, this site is the best site I have ever seen when it comes to advice from members to members. My engine wouldn't turn after a new battery and plugs so I put a post on it. Got an idea from a member, spent $15 on a new selenoid, and the thing fired right up. Alan is the go to guy and always willing to help. Hope my advice was helpful and welcome again!

Posted: August 28, 2010, 3:43 am
by olliesshop
:welcome: From Michigan !!!

Posted: August 28, 2010, 4:54 am
by dave r
wave.gif welcome.gif Welcome from Dallas Tx.The home of Bonnie and Clyde,Lee Harvey Oswald,and a Bunch of Great Slick 60's guys.
Dave

Posted: August 28, 2010, 6:44 am
by 557f1
Hi Hillchaser welcome to the site, which part of australia are you from Darren

Posted: August 28, 2010, 2:09 pm
by Uncle Skip
Alan is from Cranebrook NSW.
He is currently conversing until 2 am and drinking piss with the guys at Slick Stock, so he's unavaliable for comment.
What part of Australia are you from.
PS
All the guys say hello and welcome .... from Altoona, Iowa.
Uncle Skip from Houston.

Posted: August 28, 2010, 5:57 pm
by Johnny Canuck
Always happy to have another member of the Commonwealth aboard, Mate. We Actually outnumbered the Americans the first night, and we ain't gonna let them forget it soon.

Posted: August 28, 2010, 6:07 pm
by 65ford1
Welcome to the club from Washington state. Gene

Posted: August 29, 2010, 5:38 am
by Leeroy
Welcome! Another from Oz! I don't feel so green anymore. Where you from? I'm in Victoria.

Good luck with the slick hunt, I have seen 3 for sale in the last few months, 2 in this months 'just cars' although one is priced about as high as the moon!

Posted: August 29, 2010, 7:51 am
by Spanky
:welcome: from Houston, TX 8)

Posted: August 29, 2010, 2:09 pm
by Alan Mclennan
G`day Hillchaser!, I know of one for sale! :hm: thats if he hasnt sold it yet!, it`s not registed but would pass blue slip easy!, it`s close by me in Penrith area. So mate where are you in the land down under?,

Thanks

Posted: August 29, 2010, 4:12 pm
by Hillchaser
Thanks all, you guys are a great group.. Would love to make it over for the western nats some time.

I'm in keysborough Victoria....for those in Aussie...and Penrith is no worries.. I have cousins up in clairmont meadows.. Let me know the details of that car if it is still a available. By my calculations I could get a slick in good working orderr back from the stated from 7-10k...and to be honest I could live without the steering conversion if I had to.. The ones I have seen advertised over here seem so expensive.!![/code]

Posted: August 29, 2010, 7:33 pm
by dotcentral
Welcome to the board.

Not sure how much shipping a vehicle costs, with freight, taxes, and any duties that go with it. But if you decide to go that route might want to get in touch with some west coast US guys and see if someone can keep an eye out for you a truck . http://fordtruk.com/forums/viewforum.php?f=25

Posted: August 29, 2010, 7:39 pm
by Leeroy
Hillchaser, I looked into importing a Uni 12 or so months ago and the freight costs back then were $3500 from CA to Victoria. Thank was all inclusive of FREIGHT charges and all the disinsection costs etc, but didn't include the customs import decleration fees (Only about $150 back then) Nor did it include any internal freight within the USA.

I can give you all my shipper details and internal shippers etc if you'd like to send me a PM.

Cheers
Leith

Posted: August 29, 2010, 8:44 pm
by Hillchaser
Hey Leroy.. I have similar prices from a shipping company. So did you go ahead with the shipment ?? Do you already have a slick ?

To me it looks way more cost effective to bring a nice truck back in good condition back from the states.