Page 1 of 1
Anybody close to Lancaster PA?
Posted: March 22, 2007, 11:16 pm
by Greg D
There is a NOS Ford Fox Mustang Louver kit on Ebay I am interested in but the guy won't ship. I would be willing to make it worth someones while to P/U and ship it to me. These things are a pain to pack properly because they bend pretty easy and can't be repaired, just fair warning. Thanks, Greg
Posted: March 23, 2007, 4:18 am
by 66fordtrucknut
Greg, THere are alot of guys in that area, you might wanna put this in the mac chapter forum too.
Charlie
Posted: March 23, 2007, 6:29 am
by DV65CustomCab
I'm right up the road.
Does it come apart at all? My concern would be that it would be too large for UPS to take and would have to go truck freight.
I'd be willing to help you out with it though.
Posted: March 23, 2007, 7:55 am
by Greg D
Unfortunately it doesn't come apart, I believe the seller has the original box but it being crushed in the middle is a large hazard with these. FedEX Ground takes some pretty large items. Weight isn't much of an issue they don't weight more than about 20lbs. PM me your email please, Thank You, Greg
Posted: March 25, 2007, 7:41 am
by cookster4495
Greg,
My cousin gets out your way quite a bit,he could bring it on his truck,it would be enclosed so weather would'nt be an issue. Larry
Posted: March 27, 2007, 10:13 pm
by Greg D
Thanks Larry, DV has offered to pick it up repack and ship it to me been trading PMs for a few days now. These things are very delicate when not installed on the car this is the reason that the seller wouldn't ship it. They can also be quite valuable, I just watched one like it sell for $600, and have seen 2 others go for about $500 (anybody else wish they'd bought about 20 of em back in the 80s and stored them).
Lol, I ended up coughing up over $350 for this one. Just saying they have to be cared for in transit. You can PM me if he wants to do it. One of the things I love about this group is the way we all help each other out. I would be a member here even if I didn't like Slicks! That Galaxie you have has got to be one sweet ride! Wonder if JC is gonna raz me about being too far off subject again. 
Posted: March 28, 2007, 8:52 am
by Johnny Canuck
Hey Greg, I understand how delicate these things are. I work across the street from a place that tunes Mustangs all day long, I watch them out my office window. Reminds me of you, they have 2 Fox body shells they are rebuilding and 2 of them butt-ugly Fox Mustang sedans like the ones they made cop cars out of, that really RIP! You know the ones, look like a Dodge Aries K.
Took Jinx over there for some steering repair to the Volare clip, man she is gettiing better and better! Now, have a 4bbl Demon on the way, and Max is sending an intake for it,, should be good clean fun when that gets here!
I always felt like Jinx's front brakes were dragging, so I took the brake rod out last weekend, looks like Crackhead's dad made it a tad on the long side (no adjustment), so I turned the eccentric cam on the brake pedal so it would give it as much slack as the rod would allow... man she runs like a scared dog now, compared to before! They are still dragging a little bit I think, I have a '72 power brake booster waiting to go on with lots of rod adjustment, but then I would be back bleeding brakes again

You know how much fun that is. I have postponed getting her cab mounts and floor pans about as long as I can, I have to get the Merc on the road this year, so Jinx can get those next year at least. Taking a body shop course to get her tailgate together too. Hooked up the $10 Kenwood swap meet stereo I got just to fill the hole, and man the thing ROCKS! I decided against putting chrome trim on the windsheild, she is better chromeless IMO, but I need a new windshield rubber. Plus, I finally won my battle with the windshield wipers, the score is about 52 -1 in the wiper's favour.
I tell ya I am having more fun driving Jinx this year than ever.. you better get one of those slicks on the go! These things are FUN!!

Posted: March 28, 2007, 10:50 pm
by Greg D
JC, man you have know idea how glad I am to hear you are having such a good time with Jinx! I think you are right about keeping her all black, looks very clean and sleek (Slick?) that way, I wouldn't change it. I never did get people wanting to do fox coupes (homely) either, I get they are a little stiffer than a hatchback stock but by the time you put subframe connectors in one and probably a cage if you're actually that serious what difference could it make, go for the nicer lines. I am still sorting out what I will end up with for a Slick, if I can't find a good home for the 64 soon I might as well just fix it up. My biggest problem with the 64 is I gave up the truck I really wanted for a apparently not brite idea and this one was to be a replacement. I know I shouldn't hold that against the truck, I just liked my 66 short styleside I had alot better, and all the custom smoothing I wanted done on one was 1/2 done on that truck. I even had the tailgate filler cut for it. I know that Jay won't sell it back to me, he's put too much into it and is having too much fun with it. I wanted a factory louver for my 85 because if I had bought the car new it would already have one. I am working with a guy to aquire the one last piece I need to finish it. I am waiting for the humidity and the temperature to line up together on one weekend so I can get all the trim repainted. Will only have the engine compartment to detail, redecal (already have all of those) and put on the new door mouldings and the rest of the new weatherstripping in and the 85 will be officially restored! Can't wait for the first Stang/Ford show of the season!
Posted: March 28, 2007, 11:34 pm
by Johnny Canuck
Yep those Mustang Coupes are no beauty queens, but one they have sounds dam healthy, I'd say a small block stroker with a decent cam and 3" exhaust, it sounds sweet, and they take it for a test run about twice a day, it ain't NO kind of slouch. I'd guess it at 4-500 horses. Plus they were lowering a new body style (s33? is that it) one today, and they have other misc. cars there, most of them Fords. Even a shorty '68 Bumpside. Very entertaining LOL
Good to hear you got your Stang where you want it. Do you ever drive the new one?
JC
Posted: March 29, 2007, 7:10 am
by Greg D
New body style Stangs are S197s. How can you get any work done with all that fun going on outside your window, lol. I have a tough enough time concentrating with whichever one of mine is outside and there isn't anything else to look at where I'm at but my cars ( I work in kind of a an upscale office park area and am apparently about the only gearhead in the whole area ). If I could start my own Hi Performance / Custom shop and be sure of making a living I be all over it in a minute, has always been my dream. Seems like it would be a tough go though, I have seen some good places go under through the years round here.
Posted: March 29, 2007, 8:47 am
by Johnny Canuck
These guys took over an old gas station, yanked the gas pumps, and set up shop. They were the mechanics that worked there before. For the first month or 2 all they did was work on thier own cars, the 2 notchbacks, a Volare Roadrunner with a 360, a '93 vintage V8 Ranger with a small block stroker and drag slicks, etc. Then they somehow fanagled a few used cars to sell there too, and the last month their business has picked up great. Good guys, know their Fords, had no problem finding parts for Jinx either.
Comical to watch the little smoke shows they do for themselves on their own property LOL, they look like they are havin' fun, but they don't get to work on thier own cars 'til after 5 anymore

Posted: March 29, 2007, 1:50 pm
by Greg D
I sometimes think Bellevue needs a hot rod shop, hmmmm. I would have way too much fun, after all I would have to road test everything I built for someone, just make sure it runs right ya know. Maybe someday after I get some more cash built up. Funny thing is between family and friends etc. I spend about 1/2 of every weekend wrenching on something that isn't mine. Lol, if I had that much time invested in my 85 GT it would be done now. It'll get there though. I have told Rose for as much time as I spend working on cars I should be getting paid for it. For $ aside from my job I actually think more towards "flipping" houses though, real estate is more stable than tune ups. We are actually looking to doing our first house this spring right now. Would be nice to do about 3 or 4 a year and haul in over 100K for 3 or 4 months of actual work. Lol, I would then have more time to fix everybody elses cars!
Posted: March 29, 2007, 2:02 pm
by Johnny Canuck
Funny you brought that up. I heard yesterday of a guy who spent 5 years buying, updating and turning over houses (in a hot real estate market) that were not older than 5 years old, he retired after his 5 year stint doing this, he made so much money. Flipping can be profitable.
Posted: March 30, 2007, 11:13 am
by Slick Fan
I've often toyed with that idea too. My main problem is that I don't have enough money set aside for such a venture & being able to convince the bank that first time to allow me a loan to get the ball rolling would be a big headache.
My other problem is that I don't know squat about flipping real estate & am skeerd that I'd lose my a$$.

That would be my luck.

Posted: March 30, 2007, 12:31 pm
by Johnny Canuck
This guy was buying houses roughly 5 years old, that didn't (yet) have many maintenance issues but had out-of fashion floor coverings, door knobs, cabinetry, paint etc. He changed out cosmetic things mostly, and/or developed areas people had not taken full advantage of in the house, or had not built a deck on etc. He purposely selected newer, but out of style inside homes. Guess he made a pile. Easy work, one man operation, he just lived in the house he was doing. Not for a wife and kids guy. But he made a pot.

Posted: March 31, 2007, 11:07 am
by Greg D
Funny how a thread can take a turn go way off somewhere else. WAIT I am the one who changed the subject! Lol, anyway, I through working as a broker have run across a place that specializes in mortgages for just this purpose. I am not only looking into my own financing for flipping but I might also broker the loans, cool deal they don't just supply the $ but the also have advisors to keep a flipper from making non profitable investments in the remodel (I don't think you will want to put the 20K marble counter tops in a house that is only going to end up selling for the 95K range, lol.) I could let you know what I find out after meeting with this guy if you want. The lenders goal is for a client to end up doing about 12 houses a year and stay profitable. This type of loan is really only going to make the lender $ in volume because of the short "actual" amoritization.