Page 1 of 1

Does anybody live near Midland, Texas?

Posted: April 23, 2007, 9:53 pm
by didgeytrucker
Here's a chance to help out a young gear head. He has posted on another Forum I look at about some engine trouble. A buddy drove his car about two years ago and the car never ran right since. After two years and about $3000 in mechanics fees, he's giving it one more shot. But he is only getting help via the internet, and you know how much of a hassle that can be.

Now, the car is a Camaro and the engine is a Chevy, but if I were in the area I would spend a Saturday teaching this guy a few things about engines.

Here's his thread:

http://www.jalopyjournal.com/forum/show ... p?t=173779

PM me if you think you can visit this guy.

Tracy

Posted: April 24, 2007, 12:32 pm
by Slick Fan
Poor guy. I like his screen name though, at least he ain't afraid to admit it. :lol:

Posted: April 24, 2007, 8:08 pm
by Paul Merrell
Tracy can you tell the guy to check the dizzy cap too see if the button that toughes the rotor spring is sticking through the top of the cap. If not remove the coil pack and remove the button and then the rubber washer. Then install the button then the rubber washer that is the correct way to do it. You see the rubber washer causes a gap 1/8 between the button and the rotor spring. I bought a camaro for 300 hundred dollars with a MSD 6A and a 650 carb and aluminum intake and cragar five star racing rims they said the heads where bad all I found was the washer installed wrong :!: I guess that happened when they installed the MSD 6A coil pack.

Posted: April 25, 2007, 6:57 pm
by didgeytrucker
Read the whole post. The car ran fine until his buddy drove it. What did his buddy do while driving that killed it?

I'll mention it, though.

Tracy

Posted: May 24, 2007, 9:44 pm
by Paul Merrell
Hey Tracy I guess this guy never fixed the car or has he. I have checked the link and he has not posted a response.