Page 1 of 1

por15???

Posted: May 25, 2007, 3:55 pm
by ethan_lanning
I was wondering what por15 was? Is it an undercoating or something?
And if it isnt an undercoating I was wondering what type of undercoating you guys would suggest using for the inside of my fenders?

Posted: May 25, 2007, 4:15 pm
by Johnny Canuck
It's a thick rust paint that dries hard as nails, almost like plastic coating something.
Dangerous to breathe while applying and drying (emits cyanide fumes), and sticks like baby crap to a diaper.

Posted: May 25, 2007, 6:07 pm
by shawns fords
http://www.por15.com/
thats the link to por15 information, I have been buying it from a E bay seller and they are also now selling a product called KBS coatings, I do not know if its the same company yet, but i did order some of the products to try, I really like the stuff, I believe my profile pics has some pictures of the frotn straight axel in semi gloss por15, looks brand new

Posted: May 25, 2007, 10:22 pm
by Z-MAN
I like it alot it & works great, just be sure and wear some gloves, because it stains your hands & is hard to get off. You will have it on ya for a few days if you don't. I know from experience

Chris

Posted: May 25, 2007, 10:47 pm
by ethan_lanning
well I went to the por15 website and the por15 was kind pricy.
so I was wondering if you have to buy the other stuff that they sell to
prep the surface?Or can you just sand the metal down and put the por15 on?

Posted: May 26, 2007, 12:00 am
by Z-MAN
One of the guys turned me onto Gem Rust Killer. I used it and it worked great. I think I paid like 14.00 for a spray bottle of it at Sherwin Williams. It turns the rust into like a powder overnight. I cleaned it the next day and put on the POR15. If you can't find it up there here is the factory info..

Gem Rust Killer

http://gemrustkiller.com/index.html

Information Phone....................... 713-723-6524