Page 1 of 1
Shop or mechanic recommendation in Seattle area
Posted: October 30, 2011, 5:16 pm
by CraigM
I need to find a shop or mechanic preferably in the Seattle area that can service my hydraulic lifter valves in my 300. Any leads would be greatly appreciated. Thanks!
--
Craig
Posted: October 31, 2011, 2:56 pm
by Roger Carter
I know a person that has a shop in Kent. His nane is Bill Green. Here is the contact information I have for him.
Green Enterprises
23404 98th Avenue South
Kent, WA
253-852-8257
Hope this helps.
roger Carter
Posted: October 31, 2011, 4:05 pm
by CraigM
Thanks Roger. That's a good start.
Mechanic in Seattle
Posted: October 31, 2011, 4:54 pm
by Roger Carter
Craig,
What sort of problems are you having?
The 300" 6 is a fairly straight forward engine. A lot of the service work can be done a person with basic mechanic skills and minimal tools.
Roger
Posted: November 1, 2011, 8:52 pm
by CraigM
Roger,
I bought the truck a few months ago and upon hearing the engine run for the first time it was my dad who mentioned the valve tick-tick-tick-tick-like clutter.
My only experience in repair has been bolt-on up to this point. I'm not sure if this is something I could do with my skill-set so I would prefer to have a professional tackle it. Also would be nice to get a mechanic to give the whole engine/suspension a good once-over check while he/she is at it.