Page 1 of 1
Truck Dying
Posted: December 19, 2011, 7:34 pm
by Frank Kelley
Has anyone every had this issue? My 66 352 with MSD ignition idles fine but it dies as soon as I put it in gear. It started doing it one day last week after out driving it around. I got home and parked it in the driveway, when I came out later to pull it in the garage it started doing this.
Posted: December 19, 2011, 9:19 pm
by bunchoftrucks
Vacuum leak is what it sounds like to me. Do you have any rubber plugs on the carb ? I've seen them crack and make so wierd things happen.
Truck Dying
Posted: December 19, 2011, 9:50 pm
by Frank Kelley
Thats what I thought too. I sprayed carb cleaner all around checking for vacuum leaks. I sprayed the rubber plugs too. I will try to get some more of the rubber plugs and try them.
Posted: December 19, 2011, 11:05 pm
by Alan Mclennan
Does the dizzy have magnetic pickup?, I had a similar problem with my MSD Billet dizzy.
Posted: December 20, 2011, 12:25 pm
by Lowell
What Alan said !
Also check for broken or bare wire in the dizzy.
Firing Order
Posted: December 20, 2011, 10:28 pm
by Frank Kelley
I fixed it (bonehead) when I replaced my distributer cap I was off by 1 in the order so the timing was advanced. I put the wires back in the correct spots and it fired right up and ran just fine.
Posted: December 21, 2011, 12:24 pm
by MadMaxetc
We all have those moments.
Glad you got it fixed.
Posted: December 21, 2011, 2:16 pm
by bunchoftrucks
Most excellent and the price was right too !!