Slick 60's

does any body know where i can find the lower door panels and arm rest for my 63 the previous owner took them off and screwed particle board over the hole to mount speakers

Check the door pockets on sale thread. Thanks, Lyman.

thanks for bringing that to my attention now if they were only in my price range right now

Somebody will probably give you some if you pay the shiping. I think I have one you can have, but if somebody will give you two you can save on shiping. Give it a day or so and see if somebody offers. Thanks, Lyman.

quickquestion did all of the trucks come with these or could you get just a coverfor the hole?

there were plain steel covers for the holes. hang tight long enough you might even find some in the right color to match your doors.

id rather find the plain steel ones as im not real big on zipper pockets

I have a set that I took off of my truck to do this:

[albumimg]2184[/albumimg]

[albumimg]2183[/albumimg]

[albumimg]2185[/albumimg]


[albumimg]2186[/albumimg]

I made them for myself, and sold them on eBay, too. I did White, Off-White, Red and Black. Sold them all over the country, and Canada. I stopped posting them every week due to lack of time.

The steel panels pop-up on eBay often, the door pockets are available, and these speaker panels are an option, too.

Have fun.

Dan

I have a set. I also see them in most of the yards I go to. Though I never thought to grab them as I dont need them. Mike

i appreciate the help fellows

I had some of the plastic door bins but no rings or trim. I went with wood trim on mine and made the vinyl pocket covers. I put a magnet out of a old hard drive and a washer in the other vinyl back piece. That way when it closes the flap holds closed with the magnets and washer. I made the flap to curve as shown in the picture because when I let it go it automatically closes. You can also make your own bins out of thin plywood or paneling. Then just cover the outside in fiberglass. I made some like that one time.
[albumimg]239[/albumimg]
[/img]

sounds like a pretty good idea ill definetly think on that

i appreciate the help fellers i went ahead and put a bid on a set from ebay