Slick 60's

i have a 62' lwb uni-body that just went under the knife. i plan on using a mustang ll corss-member on bags. i was wondering what cross-member everyone uses, and if they even made one for my truck. i have used hiedts before but never on this late of ford. i would have to use universal one which are a pain. i used one on a 63 dodge build and would much rather have a would in one like the ones they use for 50's chevy. i was also wondering if anyone had info on my trucks wheel base and rear track width of the stock axle. thanks everyone!

http://www.nolimitparts.com/

not cheap but well respected , watch some of his auto cross videos in a fat fenfender .
Heres another to look at
http://www.fatmanfab.com/mustang2.php

or this prob.components are import ?

http://www.ebay.com/itm/1957-1964-ford- ... 6d&vxp=mtr



Danny

i dont want a hub to hub. i am looking for just the crossmember,the hiedts one for a 55 chevy lines up with holes on the frame and then welded in. those all require cutting of the crossmember and upper mounts

Sorry. don't know of a truley just bolt in cross member for the slicks.

Danny

This is a good option
http://www.industrialchassisinc.com/Web-blog/?p=861

62galxe wrote:This is a good option
http://www.industrialchassisinc.com/Web-blog/?p=861

X2

PFM-64f100 wrote:

62galxe wrote:This is a good option
http://www.industrialchassisinc.com/Web-blog/?p=861

X2[/quote

X3

Sorry. don't know of a truley just bolt in cross member for the slicks.

Danny

its not a bolt in crossmember it just has tabs that align it up and then you weld it in

hunter, i dont want to put your jank dakota front on, it looks like crap. i am sure it rides nice but it looks like a pos. quit trying to sell your stuff i want a MUSTANG ll crossmember did you not read the post?

Slickfan: Speaking of not reading the post, it wasn't even hunter who brought up the dakota crossmember in the first place.

All that aside, all anyone has done thus far is offer you suggestions, but I expect that if this is the kind of response they get, that will not last long

usually we welcome new guys.....today I'm not so sure...........

slickfan wrote:hunter, i dont want to put your jank dakota front on, it looks like crap. i am sure it rides nice but it looks like a pos. quit trying to sell your stuff i want a MUSTANG ll crossmember did you not read the post?

62galxe wrote:This is a good option
http://www.industrialchassisinc.com/Web-blog/?p=861

Yep,I won't respond anymore , Just trying to help. And I don't sell anything but Construction equipment and materials to contractors. Trucks is just a hobby.

Danny, not Hunter can YOU not read.

Check out Jim Wimmer's Rod Garage. That's what I used on my '57.

SPark

slickfan wrote:i have a 62' lwb uni-body that just went under the knife. i plan on using a mustang ll corss-member on bags. i was wondering what cross-member everyone uses, and if they even made one for my truck. i have used hiedts before but never on this late of ford. i would have to use universal one which are a pain. i used one on a 63 dodge build and would much rather have a would in one like the ones they use for 50's chevy. i was also wondering if anyone had info on my trucks wheel base and rear track width of the stock axle. thanks everyone!

did you check JC Whitney?