Page 1 of 1

83 Jeep Cherokee for sale - any good?

Posted: June 15, 2007, 4:46 pm
by banjopicker66
My shiftless neighbor's son (honest - 41 yr old who doesn't work!) has an '83 Cherokee wagon type he will sell for the right price.
4x2, with manual front lock-put hubs to make it a 4x4. 6 lug wheels. Body and interior shot. Chrysler 360 (supposedly rebuilt) and automatic.
Any good for a Slick transplant to make it a 4x4?

Posted: June 15, 2007, 5:07 pm
by DV65CustomCab
Ugh. AMC drivetrains of that period were thirsty and made little power. I don't see any value in it.

Posted: June 15, 2007, 5:22 pm
by Greg D
Those Jeep front and rear axles would be too weak for a full size truck.

Posted: June 15, 2007, 5:34 pm
by Jarrod
Really the only thing that truck would be good for would be the front axle and maybe the transfer case. If its a full size jeep, the unibody ones came out as 1984 model years, then it would have a dana 44 low pinion. I cant remember what transfer case it had but it won't be a np 205 (read bomb proof). It is prolly a np 207 witch is a chain driven p.o.s. I would look else where if I were you.

Posted: June 15, 2007, 5:37 pm
by banjopicker66
It is a full size vehicle, not a CJ or "Jeep." I was asking mostly for anyone who might want it, as I don't. Otherwise, it will continue to sit and rot.

Posted: June 15, 2007, 6:18 pm
by Greg D
Ahh, I was thinkin wrong truck.

Posted: June 16, 2007, 6:54 am
by DV65CustomCab
He's talking about one of these:
http://www.drbob.tqhosting.com/cherokee ... ront_m.jpg
Really just a 2 door Wagoneer. I almost bought a six cylinder 4 speed one many years ago that was a cheap trade in where I worked. The fear of the fuel mileage kept me out of it. Wise choice. :)
The unibody XJ Cherokee replaced it, and was a great vehicle IF you chose the 4.0 engine. Pity the fool who bought the blowing-head-gasket GM 2.8 or fire-prone 2.5 four.
CJs...well, there's a whole chapter of my life I'd rather not revisit. :barf:

Posted: June 16, 2007, 7:18 am
by FORDBOYpete
BP

For my :2cents: I say no.gif down_1_Revan.gif

:roll: Put your dollars where they can do you some good. :thumright:

FBp Bolt.gif

Posted: June 16, 2007, 10:11 am
by Johnny Canuck
Stacey David did a whole series of "Trucks" shows on the "Cheap Jeep", basically telling how you could pick those things up for next to nothing and make a decent machine out of them on the cheap. But he started with a good, rust -free example. and who knows how many thousands of dollars worth of donated upgrade parts.

Turned out nice in the end, but I don't think I would tackle a rusty one, Banjo.