Slick 60's

so, i was thinking of putting a t5 in the 65. ive got a big 6 with 2wd. ive found a t5 out of a 96 mustang with 56k miles on it. 200 bucks.

just did a search and couldnt find anything on a t5 transmission on here.

I have no idea if a 5.0 T5 will work, but the F150's with the 300-I6 in the mid '90's had 5spds, so finding someone who has a donor truck to harvest the trans,bell, etc is likely going to be the easiest.........

James

Jamesdfo, that sounds like a great idea! I'm sold! Now to figure that out!

thanks Greg! i think i'll pull one from a junk yard 100 bucks! will the bell housing bolt directly on? any modifications i need to make?

I have a Mazda 5 speed in my '66. 351W, same bell as a 300. Had to move the rear X member back a few inches, no biggie. The shifter comes through the same hole as the farmer four that was in the truck originally. And yeah, get the master cylinder when you strip the donor truck. I suggest a new slave/throwout bearing too, they are a bitch to change with the truck all together!
Weld a new arm on the stock clutch lever in the cab, so it points down instead of ahead as it does now. The master will be to the inside of the brake cylinder, which seems weird but it works.

i have a t-5 behind my 300 in my 67. Used the stock bellhousing, clutch and linkage. the shifter is close to the seat but not bad.

http://s63.photobucket.com/albums/h142/ ... 20Install/

madmaxetc

GREAT PICTURES!
i see that it looks like you had to modify or add an adapter plate. you tell me a bit about what you did, do you have a thread about the build?

I wrote a web page for it to show all about it, but it wont come up.

Let me see what I can do...

The hyper links don't work in the pdf, sorry.

A T-5 is a common mod for early Mustangs.

The trick is to use the S10 tailshaft, it moves the shifter foreward a couple inches.

any s10 tailshaft?

Easier to use an earlier one with a mechanical speedo, later one's had electrical. Don't remember the years.

earlier t5? i didnt think about speedometers being a factor. hrm....

Earlier S-10 Tailshaft.

There is some S10/ford T5 info here.
viewtopic.php?f=1&t=12055&hilit=trans&start=20