Page 1 of 1
Dana 70 spline count help
Posted: November 30, 2012, 5:37 pm
by dvandervossen
I have a 1965 F350 with a Dana 70 with 5.89 gears. Does anyone know what the spline count is. Thanks
Re: Dana 70 spline count help
Posted: November 30, 2012, 5:59 pm
by ICEMAN6166
axle spline or pinion spline?
Re: Dana 70 spline count help
Posted: November 30, 2012, 7:33 pm
by dvandervossen
I guess both. Looking at junkyard center sections to swap in and need to know what I need. Axles I have to stay stock because of wheels.
Re: Dana 70 spline count help
Posted: November 30, 2012, 7:49 pm
by ICEMAN6166
all the pinions are 29 so theres no issue with the yoke
axles are 30 and 35 only way to tell is remove one.
Re: Dana 70 spline count help
Posted: November 30, 2012, 8:56 pm
by dvandervossen
I assume there was a stock spline count that was standard.