Page 1 of 1

If you are a Ford nut...

Posted: August 18, 2006, 8:08 pm
by BigTim
If you are a Ford nut you should enjoy this.

Image

Now can you tell me what kind of motor this is? The intake is 1 of 25 made according to the owner.

Image

ford nut

Posted: August 18, 2006, 8:39 pm
by FORDMANLCRACKEL
I GIVE UP

LONNIE

Posted: August 18, 2006, 9:13 pm
by castruck_1964
Cool motor 8) 8) 8) 8)

Posted: August 18, 2006, 9:16 pm
by ELpolacko
I'm no Ford nut, BUT that is a Gurney Westlake heads on what appears to be a 351C!

Rare and expensive indeed!

Posted: August 18, 2006, 9:34 pm
by Comet
Check out the wicked fenderwall headers! Reminds me of the AMC Gremlins I see hot rodded out with drag prepped 401s!

Posted: August 18, 2006, 10:16 pm
by BigTim
ELpolacko wrote:I'm no Ford nut, BUT that is a Gurney Westlake heads on what appears to be a 351C!

Rare and expensive indeed!
Winner on the head, block is a 302 Boss. I understand Ford decided to sell these heads and intake as over the counter parts to make them legal for some class of racing. I have also seen this head setup to flow in reverse, in other words the headers are bolted on where the intake is.

The guy who owns this Pinto saw it for the first time cruising through the local Sonic Drive In and said everytime the cam would lope the tires would chirp. The original owner got in some financial troubles, and Jr. took it off of his hands and added it to his very, very, very extensive collection of FoMoCo goodies.

Posted: August 19, 2006, 12:09 am
by Johnny Canuck
Pinto V8..... my first car that never was. Had the springs... but bought a Mustang before the V8 ever made it in.. :cry:

Like the Torino in the BG too.. looks like a 429 CJ

Posted: August 19, 2006, 8:20 am
by BigTim
Johnny Canuck wrote:

Like the Torino in the BG too.. looks like a 429 CJ
Not sure, I couldn't get past the Pinto :shock:

Posted: August 19, 2006, 9:48 am
by doc
Cool a$$ car!!

Posted: August 19, 2006, 10:57 am
by ELpolacko

Posted: August 19, 2006, 7:39 pm
by Comet
ELpolacko wrote:for reference, check this Ebay ad!

http://cgi.ebay.com/ebaymotors/NOS-GURN ... dZViewItem
Yikes! I'll take TWO! :lol:
And that's just the valve train, heads and intake . Ya still need a short block and the carbs in the pic are not included! It is very cool though.

Posted: August 19, 2006, 9:37 pm
by BigTim
The guy that has the Pinto recently sold a Schwinn Bicycle collection for over a million bucks. He had every US made model ever made.