Page 1 of 1
Has anyone used a 78 Cougar for a frame swap?
Posted: September 17, 2013, 9:11 pm
by cobraford69
I have a 64 SWB 114wb and the cougar has the same. Was wondering if it has been done.
Thanks
Re: Has anyone used a 78 Cougar for a frame swap?
Posted: September 17, 2013, 10:14 pm
by rickairmedic
I don't know that anybody has done it yet but there's always a first time . There are quite a few of us doing the crownvic swap and it should be pretty close to the same . I do know that that basic front clip has been used in several trucks over the years .
Oh yeah wheres my manners Welcome to Slick 60's

.
Rick
Re: Has anyone used a 78 Cougar for a frame swap?
Posted: September 17, 2013, 10:20 pm
by cobraford69
Well I have a 114 wb 95 ranger and this cougar, Have been wondering if either swap had been done.
Thanks
Re: Has anyone used a 78 Cougar for a frame swap?
Posted: September 17, 2013, 10:26 pm
by rickairmedic
I know the ranger has been done Anthony posted some pics of a slick on a ranger chassis that looked pretty good . One thing to look at besides the wheelbase is the width of not only the chassis but also the track width of the donor vehicles . Personally I think the Cougar is going to be closer to the slick in track width than the ranger and will also ride better when done . Take a look at Hawaiikids build he is doing a 63 wrongbed truck on a crownvic chassis including the firewall and floorboards out of the crownvic. I don't see any reason why the cougar chassis wouldn't work .
Rick
Re: Has anyone used a 78 Cougar for a frame swap?
Posted: September 18, 2013, 10:30 am
by The Big M
The username escapes me but I remember someone here who had a short wheelbase truck on a Torino chassis (possibly '73). Not sure if the Cougar is similar.
It's my understanding that the steering box location (front vs. rear steer) plays a role in fitment as well. For example, the '79-up style of Crown Vic that Rick is using works well but earlier models had a different steering box location that caused issues.
EDIT: The username was CMenard but he hasn't been on since '07 and all the photo links are broken, so no pics. It was a 65 shortie on a '73 2-door Torino chassis.
aarons428 also has a 73 Torino front clip in his truck:
viewtopic.php?f=32&t=12966&hilit=torino
Re: Has anyone used a 78 Cougar for a frame swap?
Posted: September 18, 2013, 3:52 pm
by foodstick
steering box loxcation, DING DING DING
That what I would really check to see how it works.
Re: Has anyone used a 78 Cougar for a frame swap?
Posted: September 19, 2013, 10:57 pm
by cobraford69
I think the 73 is the same Chassis as the Cougar. I know a 75 grand torino is the same chassis. Thanks