Page 1 of 1
pics.
Posted: January 3, 2014, 3:53 pm
by Mr. Jones
I'm sitting here with Photo bucket open,and this is open.I've got a photo selected and the share photo window is open.I can't get the img. code to move over here .What am I missing??? I can't fiqure any of this computer stuff out,my 12 gauge is not far.could be my next move!!!!!
Note; I opened windows once for this site,then opened it again for Photobucket.So there are two things going on,I couldn't figure out how to run two things at once on this one.......
Thanks,
Dan
Re: pics.
Posted: January 3, 2014, 4:29 pm
by LM14
In photo bucket, hover over the picture you want to post and a star shaped object will appear in the right upper corner, hover over that star and a drop down menu will appear. Click on "get links" and another menu will appear. choose the style of image you want to post and click on that line and it should flash yellow and say "copied". you have the picture captured now. Click the "X" in the right upper corner to close this menu.
Now go back to this site and put your little blinking cursor where you want the picture in your post, right click to open a menu and click on "paste". You should see the script appear. When you post that will be your picture.
That is an example of "image code" from PB.
Hope this helps,
SPark
Re: pics.
Posted: January 3, 2014, 6:30 pm
by Mr. Jones
http://s1278.photobucket.com/user/dwjon ... rt=1&o=100
ok that worked I forgot to re-size it Thats a new garage one of customers built. I installed the copper gutters,
after further review ,it didn't work ??
Re: pics.
Posted: January 3, 2014, 7:05 pm
by LM14
Didn't work for me, just took me to a generic PB page. You are probably where you need a password to view what you have.
SPark
Re: pics.
Posted: January 3, 2014, 8:00 pm
by 36truck
For pics it's best to load into photobucket. Then highlight the bottom code next press the control button & the letter c at the same time. go to your posting in Slick 60's and press control & the letter v at the same time, it will now show in your post.
Re: pics.
Posted: January 4, 2014, 9:26 am
by Mr. Jones
Re: pics.
Posted: January 5, 2014, 5:14 pm
by Gritsngumbo
Got a little carried away with the code posting, did we?
Re: pics.
Posted: January 9, 2014, 10:17 am
by Mr. Jones
Totally clueless on that one.