Page 1 of 1

Let there be light(s)

Posted: January 5, 2014, 5:54 pm
by Gritsngumbo
Although no work on my slicks to report, I can report some progress in the new year on getting my shop (40' X 40' X 12') with two overhead doors in shape.
A few months ago a friend of my wife's gave us a couple dozen drop-in type commercial light fixtures (48", 4 T8 bulbs) out of an office remodel project. The 8' two-bulb lights in my shop were quickly suffering from ballast failure, and I was down to two lights on one side still operating properly. Wanted to use the "free" lights to save money, but couldn't figure out how I could mount them by myself at that height.
Finally got smart (with my new job I have a little money to spend) and hired a local handyman to take care of installing the new light fixtures. He's about 1/2 my age and has a helper, so they made pretty quick work of getting the old fixtures down and the new one's installed. He also did a little rewiring to fix some "questionable" electrical work by one of the PO's.
What a difference those new lights make. Four on each side. Very bright and now I can actually see to get things organized. Despite my well-laid plans, because I had some help available, we wound up moving the trucks and contents of my old shop to the new place in about 5 days so there really wasn't a chance to place things where I wanted, so it's a real un-organized mess.
Will probably get a couple of halfway house workers next weekend (if it warms up some) to help build some shelves and move the heavy stuff out and around so I can get it organized.

Re: Let there be light(s)

Posted: January 5, 2014, 6:04 pm
by Toyz
That explains it; I asked my wife this morning if she didn't think the sun was coming up a little more northerly this morning :P
As far as "un-organized", I just finished putting the second 8' wide by 18' high pallet rack section. Now, even if I can't find something, I'll at least know "it's up there!"
If I end up missing for a while; it is likely to be due to "it's up there!" being the 18' shelf!
Paul

Re: Let there be light(s)

Posted: January 5, 2014, 6:24 pm
by Gritsngumbo
Hahahahaha. Well, there's that. Also some of the brightness could have been the eight new floodlights on the house. 1140 lumen CFL's. Pretty sure you can see the house from the space station. :-) The entire compound is now on dawn to dusk photocells. Let there be...and there is. Planning on several 8'LX8'HX2'W shelving units. I can do those fairly cheaply with 2X4's and plywood.
Edit: Paul. Just re-read your post. 18 feet? Wow. Tell me you have a fork lift or at least a crew of monkeys to scurry up and down.

Re: Let there be light(s)

Posted: January 5, 2014, 6:43 pm
by Toyz
Yeah, had my local "spiderman" helping. He shinnied up the structure to throw a rope around a beam to erect the 18' center upright. I had managed to get the one at the wall in place by myself, but it seemed reasonable to ask for help for the center one!
I got to get a wider bucket for the 'bota, though; the stepladder was not real stable with two legs in space :twisted:
Paul

Re: Let there be light(s)

Posted: January 5, 2014, 7:51 pm
by Gritsngumbo
How are you going to get your "stuff" up there?

Re: Let there be light(s)

Posted: January 5, 2014, 10:33 pm
by Toyz
"wider bucket for the 'bota" :lol: I've been "storing" my brother's scissor lift for some time; might as well put it to use, although it appears it's battery time :( .
Balancing a slick hood and a Bronco door on the scissor lift hasn't proved to be much fun so far, however.
The old deal of "when my ship comes in"; I'm going to upgrade to a four post lift, let's see, I'm 6', my 4x4 tailgate is about 3' from the ground, lift is good for 6'.
Guess I may have to stick to lighter, scissor lift-capable items on top rack! :roll:
Paul

Re: Let there be light(s)

Posted: January 7, 2014, 2:57 am
by Alan Mclennan
No photos never happened!, thems the rules Gerald!, be sure to Slip, slop and slap! with all that radiation over head! :D

http://www.youtube.com/watch?v=tGgn5nwYtj0

Re: Let there be light(s)

Posted: January 8, 2014, 10:46 pm
by 6166 Junkyard Dog

Re: Let there be light(s)

Posted: January 8, 2014, 10:56 pm
by Gritsngumbo
[quote="Alan Mclennan"]No photos never happened!, thems the rules Gerald!

I know Mac, I've made a couple of attempts but it's more difficult than I thought to take a photo of lit lights. I'll keep trying. :-)

Re: Let there be light(s)

Posted: January 9, 2014, 1:47 am
by Alan Mclennan
Gritsngumbo wrote:
Alan Mclennan wrote:No photos never happened!, thems the rules Gerald!

I know Mac, I've made a couple of attempts but it's more difficult than I thought to take a photo of lit lights. I'll keep trying. :-)
just do a before and after light switch activation photos Gerald!, without flash on........ :oops:

Re: Let there be light(s)

Posted: January 9, 2014, 4:33 pm
by Gritsngumbo
Shop Lights. Here's proof. Right bank. The forth light is under the door when It's open:
Image
I won't show a pic of the floor. Too much stuff that needs organizing. Unless you really want to see a picture of my stuff :-)

Re: Let there be light(s)

Posted: January 10, 2014, 1:33 am
by Alan Mclennan
:shock: why wouldn`t we !! :roll: