Page 1 of 1
trans
Posted: January 16, 2014, 7:59 pm
by 62galxe
Have a 65 im scrapping. Is the 3 speed trans and bellhousing worth the trouble to pull or worth more as scrap. Its behind a 240.
Re: trans
Posted: January 16, 2014, 9:49 pm
by unibody madness
Will the bell work for the t5 conversion? If it fit a y block I would want it, sadly I dont think it will
Re: trans
Posted: January 17, 2014, 9:35 am
by 64 f100
If nothing else, I would pull the shift linkage. Personally, I would pull everything off that is usable, but then, I am a packrat.
Rich
Re: trans
Posted: January 17, 2014, 10:12 am
by charliemccraney
64 f100 wrote:Personally, I would pull everything off that is usable...
Rich
Me, too. While things may not be particularly hard to find, they sure aren't getting easier to find. I would save
anything that is good and if I didn't have room to hold onto it, at least make an effort to give the stuff to people who either can use it or can store it before I scrap it.
Re: trans
Posted: January 22, 2014, 12:05 pm
by BigBadDad
I have a 3 speed from behind a 66 352 that I have been advertising on Craiglist for $45. Over a year, and I am getting tired of tripping over it. It may be going to china soon....