Page 1 of 1

Shopping Spree

Posted: February 5, 2014, 2:17 pm
by LM14
Want on a bit of a shopping spree the last couple days. Sold the Falcon so had the cash to do some things I've been putting off.

First, ordered the fiberglass hood for my Maverick. If you are looking into fiberglass parts for anything, and US Body Source is an option for those parts, look into Jegs as the supplier. I got my hood at the same price that US Body Source sells them for but no truck freight and no crating charges. It came by truck freight but Jegs has a deal for $69.99 oversize freight and no handling charges. Saved me $150 from my US Body quote. No packing fees, no truck freight fees, etc. Look into Jegs as a source for big items. I'm very happy with this deal.

Image
Image

The scoop that will let the tunnel ram stick thru, still needs bonded and worked to be done.

Image

Also picked up a period correct Sun tach. It's all new electronics with a vintage correct face and mounting cup. Looks like what was available in 1970!

Image

One of the problems in dissolving our racing partnership is the tools I loose. I don't own a chop saw, torch or some specialty tools that my partners owned so I have to replace a lot of items to be back "whole" again.

Picked up a Hobart medium duty torch kit at a new Mills Farm and Fleet store Monday. This same kit is $220 at my local tool supplier, $199 at Tractor supply but Farm and Fleet has them for $179. Never had a Hobart torch but it looks the same as everyone else's and uses Victor parts.

Image

Since a partner always supplied a chop saw, I decided I needed a new one of those, too. Again, Farm and Fleet beat everyone I priced. Picked up a Milwaukee for only $159. I've seen this exact same part number anywhere from $220 to $172 until I found this one. I'm liking this store. Had to re-work my stand a little but it has more power than our old one and it's the only one I can find that adjusts 45 degrees left and right, most only adjust one way.

Image
Image

Since I've combined my tools from my shop, the race shop and what was in the trailer, I have too many tools to fit in my old roller cabinet. I owned most of the hand tools for the race team. Found these boxes at Menards. No shipping costs, you can choose anywhere from 26" to 72" wide, all lift/latch drawers, full extension drawers, all roller bearing slides (double row on the big drawers) and actually heavier than a lot of other boxes sold today. Order on line and get your choice of colors and not just the green boxes Menards displays at the stores. From my research, they fall mid-way between a Snap-On/Mac/Matco style box and the cheapies. This box is a lot stiffer than the same sized Craftsman box available now (current Craftsman boxes are junk in my opinion) and is more in line with the metal thicknesses in my older (35 year old) Craftsman boxes I outgrew. I chose a 46" wide box setup. Converting my old 26" setup to nothing but electrical and fittings/tubing benders/AN fittings/plumbing items.

Image

Also bought a stand mounted buffer/polisher and a bench mount belt/disc sander combo. All I have to do now is bite the bullet and buy my Oxy/Acet tanks and get back to work!

This is a downside I hadn't considered when we dissolved the race team. One partner wants to leave all his tools at my shop so I would still have them at my disposal. Problem is, what he wants to leave takes up a lot of room and gets used very little. Guess that's why he doesn't want to clutter up his new garage. Might be a midnight tool return coming up. That would be a switch, somebody breaks into your garage and leaves a whole pile of tools!

SPark

Re: Shopping Spree

Posted: February 5, 2014, 2:27 pm
by Hoofbeat Racer
Who doesn't like buying new tools? :mrgreen: Right on Steve, looks good. thanks for the heads up from Jegs for Usbody stuff. I just looked up our hoods(FFT-08) and they are 499 and the shipping is 69 bucks as well. That would definitely make it more worthwhile for me if I picked it up at slickstock. The shipping quote from USbody was substantially more even to a US address when I checked into it a few months ago

Re: Shopping Spree

Posted: February 5, 2014, 3:08 pm
by LM14
I was leery of the shipping price but it held up! Very happy with the part and with the service. Shipped on the date they said it would and got here 3 days later. It's the only way I will buy 'glass parts from now on.

Here's a link to the whole timeline.

http://mmb.maverick.to/showthread.php?t=97050

SPark

Re: Shopping Spree

Posted: February 5, 2014, 4:12 pm
by Alan Mclennan
That's all very nice Steve, but did Dianne get some grippy tryes?.............. :rotflmao: ....I suppose you`d had to of been on Chat on Sunday night to get the joke! 8)

Re: Shopping Spree

Posted: February 5, 2014, 4:39 pm
by LM14
She didn't get any new tires, or tire dope, but I got another car!

http://www.electricdreams.com/Shop/carr ... 14332.html

SPark

Re: Shopping Spree

Posted: February 5, 2014, 5:01 pm
by foodstick
Just to remind you guys the COT stocker is the only way to go on the wood tracks, I love the superbirds, but the chassis is crap.. with some work you can mount them on the COT chassis and they work GOOD.

Re: Shopping Spree

Posted: February 5, 2014, 7:02 pm
by LM14
I have 2 COT that came with my set. The Lola is way faster but you can't run up behind somebody and bump them or you just go under them.

SPark

Re: Shopping Spree

Posted: February 5, 2014, 8:45 pm
by foodstick
We have GOT to get you on one of the local tracks spark...

Re: Shopping Spree

Posted: February 5, 2014, 9:29 pm
by LM14
It will happen. Be gentle.

SPark

Re: Shopping Spree

Posted: February 5, 2014, 10:02 pm
by Alan Mclennan
OK what does COT stand for? :?

Re: Shopping Spree

Posted: February 5, 2014, 10:40 pm
by LM14
NASCAR's name for the current cars. "Car Of Tomorrow" = COT

This style:

http://www.electricdreams.com/Shop/carr ... -3507.html


SPark

Re: Shopping Spree

Posted: February 6, 2014, 12:36 am
by foodstick
spark, if you like that formula kind of car.. wait until we get you driving a chipped slot-it car.

Re: Shopping Spree

Posted: February 6, 2014, 4:26 pm
by Alan Mclennan
Thanks Steve..............so Lance, do you like how the Slot-it cars perform?