Page 1 of 1

cleveland 180 deg headers

Posted: February 8, 2014, 8:32 am
by slixtyfive
A few of you may know that I also have a vintage Mustang stock car project in the wings. I'd like to use a Cleveland engine and have 180 deg headers on it as I believe those were used quite often back in the 70s. (at least my dad used them on his in the late 70s). I see that 180 deg headers are still offered for the 351 W but have not found any available for the Cleveland.

So i'll just throw this out there in case anyone on here runs across a set - I'd appreciate if you let me know!

Thanks

Re: cleveland 180 deg headers

Posted: February 8, 2014, 12:57 pm
by LM14
I had a set about 15 years ago. You might try calling Larry Eckrich at Precision Performance in Cosgrove, IA. 319-545-2212. He would probably be your best bet to find some. There has been a set that runs thru some racing auctions every few years, try the auction at Farley this spring.

SPark