Page 1 of 1

Short uni's with in bed campers- anyone do it?

Posted: August 20, 2007, 9:43 pm
by Phil
I saw an old slick of the highway last weekend but didn't stop. :(
It had an over-roof in bed camper. Anyone ever see one before?

I suspect my rig has enough leafs to handle one

Posted: August 20, 2007, 11:57 pm
by Ford4jack
About the only slick I have seen with a cab over was a buddy's camper special back in high school. Not sure if it was 1/2 or 3/4 ton or a 65 or 66.

I do remember some great partys in that truck though. :lol:

I would think with a set of sway bars yours would be ready.

Wonder if the owner has the tailgate packed away somewhere.
might be worth checking on if it was setting at the owners home.

Posted: August 21, 2007, 3:50 am
by Garbz
I have the 63 AMT long bed with the optional ford slide in camper shell..

Really ugly bugger to.

Garbz

Posted: August 21, 2007, 8:35 am
by fmartin_gila
With the front holes the way they are, I couldn't find anything to cover, so I made a slightly-over-cab-high shell for my short uni. It stands about 6 or 7 inches taller than the cab. Made a base to cover the holes and match the curve in the cab back out of 1/8 X 3 strap, the rest of the framework is made of 3/4 thinwall square. Covered with alum sheet from a 60s overhead slide-in that I found. It weighs about 300 lbs. Not quite what you are asking about, but trying to show if you want it, you are going to have to make it. I don't think there is anything available for these pickups. Also, if you get up to high, may have a problem with not having any swaybars, mine isn't heavy enough or high enough to cause any problems.
Fred

Posted: August 21, 2007, 8:26 pm
by willy3486
I remember seeing a camper special a few years back. It had a camper that was optional from ford. Apperently Ford offered a camper direct from the factory or something. It was ugly. Forgert the bed camper and go with a vintage camper like me. I got 2 vintage ones now,.

Posted: August 21, 2007, 9:20 pm
by ras4434
I have a 66 f100 and enjoyed (for the most part) camping with a cab over camper for 6 years. I did learn some things though: Make sure that the tires can take the extra load (took three trips for me to learn that one), Dont over load the camper (the race that holds the nearings in the rear end heats up and slides down and that took only two trips. A 4speed and over loads help. Probably the dumbest thing about what I did though was using the original brakes. Dont ask me how I know that brake fluid boils and why I had to have a block of wood in the cab. Gosh I cant believe I did that and am here to tell the sordid tail.

Posted: August 26, 2007, 10:26 pm
by didgeytrucker
Garbz wrote:I have the 63 AMT long bed with the optional ford slide in camper shell..

Really ugly bugger to.

Garbz
HOW do you get in the upper section? I have that kit, too. Unbuilt in the box. The 1967 issue had the camper.

Tracy