Page 1 of 1

found out what bumper my slick is running

Posted: August 31, 2007, 10:44 am
by Phil
78 F150. Parked next to my buddy's truck. Same bumper

Image

Posted: August 31, 2007, 1:24 pm
by Greg D
Out of curiosity how is it mounted? It certainly appears to fit well.

Posted: August 31, 2007, 3:02 pm
by Phil
Greg D wrote:Out of curiosity how is it mounted? It certainly appears to fit well.
seems to be OK. Im 212 and it holds me up :lol:

Ill look at the brackets again. It looks semi stock hardware.

Its about 1.5" too long and squared off on the ends but not obnoxiously so.

Posted: August 31, 2007, 3:07 pm
by Greg D
Heavyhauler wrote:Its about 1.5" too long and squared off on the ends but not obnoxiously so.
The stock bumpers look too long also.

Posted: September 1, 2007, 7:25 am
by DV65CustomCab
Post 66 bumpers fit our trucks but are shaped differently.
A self-appointed genius on "that other site" has argued with me about that fact until he's blue in the face. He's still wrong that they "are all the same bumper, because they all have the same part number". :roll:
Junkyard dog has the pictures in his catalog that plainly shows the difference to the ends.

Posted: September 1, 2007, 8:09 am
by mikecarson
LOL...part numbers.

I ordered an aircraft part for a 35 Bonanza. When the part arrived, it wasn't the part I needed, but had the correct part number. I did some research, and the part I received was for H35 thru M35. Same location on the fuselage, but not the same shape.

Posted: September 1, 2007, 8:17 am
by Phil
mikecarson wrote:LOL...part numbers.

I ordered an aircraft part for a 35 Bonanza. When the part arrived, it wasn't the part I needed, but had the correct part number. I did some research, and the part I received was for H35 thru M35. Same location on the fuselage, but not the same shape.

I suspect mismatched parts on an aircraft are a bigger deal than a slick :shock:

:lol:

Posted: September 2, 2007, 9:24 pm
by 61ford
now i was told that 48-79 front frame rails were the same width if that was true wouldnt that mean like a bumper from one of would interchange?i know it wouldnt look right just wondering

Posted: September 3, 2007, 6:41 am
by DV65CustomCab
61-64 frame uses three bolts per side to attach bumper.
65-66 uses two.
Frame rail ends are different.

Posted: September 3, 2007, 10:21 am
by GLindley
I think they stopped using the 3 bolt bumpers in '63. My '64 only has 2 bolts.

Posted: September 3, 2007, 10:49 am
by Johnny Canuck
Mine also has 2. MIne was built in July tho, almost the end of the model run for '64.Might have been a mid year change, I have heard of other early '64s with 3 bolts.
Typical of Ford using up their inventory even on a model year change it seems. Some '64s have the door hinges with a spring catch when they are open, some don't.