Page 1 of 1
J.C. Brick built on Chop Cut Rebuild
Posted: August 31, 2007, 3:29 pm
by prost66
John ,have you been watching the build of the Bricklyn on Chop Cut Rebuild show. They have given alot of info on the car.Had designers and Bricklyn himself on the first show. I learned alot I didn't know about them,such as AMC suspension, 4000 lb wieght, etc.They are going to lighten the frame. You might enjoy watching it, could have already been on for all i know. Merle
Posted: August 31, 2007, 4:12 pm
by Johnny Canuck
Merle, I don't have a high enough level of cablevision to get the Speed Channel, so I haven't seen but what is on the website, for the show (previews sort of)
I would
certainly like to see it but I guess I will have to wait for it to come out on DVD
Thanks for the heads up tho, Merle!

Posted: September 3, 2007, 12:23 pm
by bigtrip460
http://www.youtube.com/watch?v=antwENjvNqw
check this out. you tube is chock full of brick vids.
Posted: September 3, 2007, 12:30 pm
by Johnny Canuck
Pretty much seen them all. That particular one I wonder how his doors work. I have to hold the button in to get my doors up or down , his is just one touch.
Very similar car to mine that one, otherwise.
Posted: September 4, 2007, 2:58 am
by bigtrip460
maybe its a maintenance thing or certain type of piston/actuator. I was impressed with the speed and how solid they seemed to close. I learned alot about a car I knew almost nothing about. hell I never even saw one til I watched "deadline auto theft". its a cool car made even better by the 351!
Posted: September 4, 2007, 7:49 am
by Johnny Canuck
My doors open/close with about the same speed, but his seem to open with one touch and have a cutout or something when they hit the top. Must have a different/better opening system than mine with a cutout I guess.
Yes, besides the
battery
coil
starter
starter solenoid
air pump(s)
air lines
new calipers
new wheel cylinders (one of which I put on yesterday)
new brakes
new brake lines
rebuilding of the carb
new fan
new waterpump
new rotor/cap/ign wires/plugs
relined gas tank
2 fuel pumps
new fuel line
all new hoses
new seats
that I have done so far, it needs
new/redone rad
new carpet
new A/C parts
new gas tank sender
new upholstery
new heater controls
new heater core
new door seals
new brake booster
650 demon and intake waiting to go on
wheels polished
new back tires
steering wheel redone
a dipstick and tube I am waiting patiently for Larry Cook to send me

(Hi Larry!)
and misc other sundry things like door locks etc.
as well as body work to fix the cracks
but besides all that, it get a LOT and I mean a
LOT of attention at car shows gas stations, or anywhere else, and is generally a lot of fun to drive! when I am not wrenching on it LOL
and even then people are constantly stopping to look at it in my driveway
Posted: September 4, 2007, 11:26 am
by bigtrip460
The air doors on this car were an unusual prototype "sliding plunger" valve. I've had the car 17 years and it's still the prototype valve. I don't have to hold the button down because of the way the valve is built. If your doors have a pressure regulator like this one, you can increase the pressure to the doors so they raise faster. Any other questions, let me know!
he wrote that on the you tube page in response to a question about the doors.
it seems like you have your work cut out for you, eh?