Page 1 of 1
XL 100
Posted: August 24, 2006, 10:01 pm
by Paul Merrell
:oops: I know this is a bad question to ask but I am only 33 years old and I won't to know what is so special about XL 100. Was it a drag truck or something else if it was a drag racer how fast could it run the quater mile and why is the front higher is that to put more weight to rear for traction?
Posted: August 25, 2006, 10:14 am
by Garbz
Lets See....Why So special?????
1 IT is the only verified factory expermental race truck ever made by fomoco. (some say there are more but none have surfaced). Think of a Thunderbolt by another body style.
2 IT is the only verified f100 to ever have a 427 engine installed from the factory.
3. It is still owned by the original purchaser.
4 It has less than 3000 miles on the odometer since new in 1963.
5. The racing pedegree and history of just whom raced it and rode in it make it the most valuable truck in the country in my opnion.
6. The front is raised on blocks to aid in weight transfer. trucks have horrible transfer as the rear is light. Think "Gasser", a period perfect example of early sixties drag racing history and technology.
Plus Bill is an awesome man!
Garbz
Posted: August 25, 2006, 10:23 am
by Johnny Canuck
Too bad Farmer Bill's computer is on the fritz or he would fill you in.
1/1 Racing vehicle made by a major US car Company.
The Henry Ford Museum phones him up once a year to ask if he is ready for them to take it yet.
If Barrett-Jackson can get almost $2 mil for a 1/3 Olds last year, what do you think they could pull for this 1/1?
Do the words:
Only one in the world
One owner
Low mileage
Museum piece
Racing History
mean anything?
LOL
JC
Posted: August 25, 2006, 12:07 pm
by BigTim
Is there anyplace that has more pictures of this truck. I am almost computer illiterate, so they are probably on this site and I just can't find them.
Posted: August 25, 2006, 12:12 pm
by Max
So what is the master plan for this truck? Was it trailered to SlickStock or driven? JC, up close did it look like it had under 3,000 miles on it - interior, under hood, underneath, etc.
Just a cool story in itself!
Posted: August 25, 2006, 12:22 pm
by Johnny Canuck
Bill trailered it to SS, It was sans transmission, so he couldn't drive it anyway. I would think you would usually trailer a race vehicle anyhow.
It looks as close to new as a 43 year old vehicle possibly could.
Bill wants to restore the running gear to be able to take it for one(or more) last big smoke show on the strip before he retires it.
And one ride for JC of course.
http://www.f-100xl.com/
lotsa pics on the SS2 album
http://fordtruk.com/forums/album_cat.php?cat_id=50
XL-100
Posted: August 25, 2006, 2:23 pm
by prost66
I saw it run in the 60's at Indy with left front tire off the ground when it left the chute. It is in awesome condition for a 40+ year old Uni body.I can't believe how good the doors open and close for all the twisting of the one piece body-bed from drag racing. Don Nicholson,drove it 5 or 6 times at races.Nicholson,Grumpy Jenkins,and Prudhomme dreaded when it pulled into the tracks.There was a complete write up on it in Legendary Ford magazine this last spring with all the stats and history of the truck.There were no trucks racing back then and it kicked a--. My truck was in great shape when I got it,but not near the condition the XL is in. It is a great piece of Ford racing history and I would give my Left n-- to own it. Yes J.C. We will be fighting for the first ride in it in K.C. Awesome Vehicle in it's day and today. Merle
Posted: August 25, 2006, 3:29 pm
by Garbz
Max....
It is so period correct it still has the dents in the underside of the hood from engine parts exiting under stressfull rpms.....
Its like sitting in a time machiene. It has the typical wear from being in storage since the mid sixties when Bill last parked it.
Garbz
Re: XL-100
Posted: August 25, 2006, 11:12 pm
by Comet
prost66 wrote:I saw it run in the 60's at Indy with left front tire off the ground when it left the chute. It is in awesome condition for a 40+ year old Uni body.I can't believe how good the doors open and close for all the twisting of the one piece body-bed from drag racing. Don Nicholson,drove it 5 or 6 times at races.Nicholson,Grumpy Jenkins,and Prudhomme dreaded when it pulled into the tracks.There was a complete write up on it in Legendary Ford magazine this last spring with all the stats and history of the truck.There were no trucks racing back then and it kicked a--. My truck was in great shape when I got it,but not near the condition the XL is in. It is a great piece of Ford racing history and I would give my Left n-- to own it. Yes J.C. We will be fighting for the first ride in it in K.C. Awesome Vehicle in it's day and today. Merle
Do you know what it ran back in the day? Curious to know ET and speed.
xl
Posted: August 25, 2006, 11:34 pm
by FORDMANLCRACKEL
WEIGHT.....3825 POUNDS
BEST ET....12.72 1/4 MILE
SPEED.......108 MPH
VERY IMPRESSIVE
LONNIE
Posted: August 26, 2006, 11:14 am
by Johnny Canuck
Bill, the owner of the XL is such a library of information, that he is more than willing to share with interested parties, I could not absorb 100% of the wealth of info he has to share, into my wee pea brain.
But, I am pretty sure he said he ran a best of 11.8's in that truck.
Also, he said that at a certain speed.. say 120MPH , it's like a barrier that the truck wont pass, due to the barn-door aerodynamics of a truck..
He had it in several configurations when he was campaigning the truck. It CAME with a 427 side-oiler, but Bill says for a while he had a SOHC in it too..
To really appreciate ALL the truck you have to see it AND meet Bill. Sitting in a museum, you would never get Bill's drag racing stories and tractor pulling stories,and unbelievable wealth of knowledge to go with it.
Bill is the real deal, the actual expert that other fakers might claim to be.
JC
100
Posted: August 26, 2006, 7:43 pm
by FORDMANLCRACKEL
Johnny Canuck wrote:Bill, the owner of the XL is such a library of information, that he is more than willing to share with interested parties, I could not absorb 100% of the wealth of info he has to share, into my wee pea brain.
But, I am pretty sure he said he ran a best of 11.8's in that truck.
Also, he said that at a certain speed.. say 120MPH , it's like a barrier that the truck wont pass, due to the barn-door aerodynamics of a truck..
He had it in several configurations when he was campaigning the truck. It CAME with a 427 side-oiler, but Bill says for a while he had a SOHC in it too..
To really appreciate ALL the truck you have to see it AND meet Bill. Sitting in a museum, you would never get Bill's drag racing stories and tractor pulling stories,and unbelievable wealth of knowledge to go with it.
Bill is the real deal, the actual expert that other fakers might claim to be.
JC
JC
YOU ARE CORRECT. MY NUMBERS CAME FORM THE FIRST ARTICAL I READ IT SHOWED PIC. OF A SIDE OILER. AFTER MAKING MY POST I READ THE SECOND ARTICAL OF THE 11 SEC. ET. SO IM GUESSING THE 12 SEC. WAS THE SIDE OILER AND THE 11 SEC MUST HAVE BEEN WITH THE CAMMER. I THINK WE GOT IT RIGHT NOW. SORRY I CHEATED BILL OUT OF A SECOND. ONE SECOND OUT OF A LIFE TIME= NOT MUCH ONE SECOND IN A 1/4 MILE= A LOT. WOULD LOVE TO SEE IT MAKE A RUN DOWN THE TRACK. NO NOT REALY. I COULD WATCH IT ALL DAY!!!!!!!!!!!!!
LONNIE
Posted: August 26, 2006, 10:38 pm
by MadMaxetc
I will have my camera at KC to record all the stories...
Can't wait!
Posted: August 26, 2006, 11:18 pm
by Comet
Wow, that's pretty good considering the crappy tires of the day. Given the lack of weight in the rear of trucks, hooking up was always a problem. I'd bet he could do a whole lot better with modern tires.
Posted: August 27, 2006, 12:23 am
by Johnny Canuck
I would think so, Comet. Plus ol' Bill still has a few tricks up his sleeve.. no grass growing under his feet..
Yep there are those who claim to be "experts" and "concours judges" etc. etc.. Bill has forgot more than those yahoos ever knew.
Who phones up Holman-Moody and asks to talk to the owner by his first name? and the Boss REMEMBERS the crank grind, because it's one of 13 they ever made..