Page 1 of 1

Safety when using POR-15

Posted: September 4, 2007, 10:54 am
by Max
For all you folks who swear by POR-15 and slop it on everything, please be careful and use the right safety equipment when doing so...

http://autobody101.com/forums/viewtopic.php?t=8733

Posted: September 4, 2007, 4:01 pm
by FORDBOYpete
Max,

I can't tell you how many times I've written about the generation of this highly toxic byproduct when using the POR line of products. no.gif down_1_Revan.gif

I finally gave up because people wanted to argue over viability of my claims, but they wouldn't get a MSDS & read Haz Mat warnings themelves. :roll:
Reminds me of really messed up & dead guys I used to know who told me Imron was perfectly safe & harmless to use back in the day too. :oops:

fyi.gif Isocyanate exposure deteriorates animal tissue nervous systems and eventually causes the body to shut down completely. It is not a pleasant sight either. It's similar to cholenstrase inhibition, another ugly way to go. FWIW shrug.gif nono.gif

FBp scared.gif :peepwall: nono.gif

Posted: September 4, 2007, 5:04 pm
by Max
Isocyanates are bad, bad, baaaaad news!!!

It's not like being around gasoline fumes your whole life either - it doesn't take much of that stuff in your lungs to start affecting things.

Also, aside from inhaling the fumes - your body absorbs it through exposed skin and your eyes! There is a reason why you sometimes see painters wearing full body suits and masks.

I know not everyone here will paint their own trucks, but many autobody products and finishing solvents have iso's in them.

Posted: September 4, 2007, 5:14 pm
by ripsnorter
I've yet to use any POR products.

However I was raised in a fiberglas and autobody shop. From about 8 years on I was either welding or painting or do something that probably had a chemical in it. I at least wore a respirator 90% of the time, but my dad would walk into the glas shop, grab the choppergun, no mask, not even a dust mask, and start spraying. The room would be so full of mist you couldnt see 10 feet, and he'd be in there inhaling the stuff.

His reason was because he hated to have anything hanging off him like a respirator.

I have to admit that when I do paint (not much anymore) Oftentimes I only wear a dustmask or sometimes nothing at all. Its easy to be lazy about putting on some safety equipment, and just because you hear the people that have been in the business for years say "aww heck man its fine, doesnt do no harm" doesnt mean anything. you'd be surprised how many people that have been working in chemicals for 20+ years dont bother to find out whats in the chemicals they so happily breathe or dip their hands in.

I've spent a good portion of my youth buried up to my elbows in resin, catalyst (hurts after a while), various paints and reducers and especially acetone. I'm still not sure what possible damage that stuff can do to you, but it doesnt hurt to be careful.

Posted: September 4, 2007, 5:54 pm
by Alan Mclennan
Amen to that.
I`ve been a plumber for 36 years, and most days would come home with PVC etch primer and solvent cement on my hands.they are now saying that some of what we thought was old age coming on might be the results of long term contact with these chemicals.I have two sons working with me now, and we now use a water based primer but are stuck with the solvent cement thou (pun not intended)so yes be very carefull!!!!!!!.

Alan

Posted: September 4, 2007, 6:30 pm
by Phil
Glad I never sprayed it.
Got it in my eye once :wink:

Posted: September 4, 2007, 11:12 pm
by Ford4jack
Y'all got that right protection is very important when dealing with chemicals

Lead's a bad one to work with also I'm living proof of this.

Posted: September 8, 2007, 1:33 am
by shawns fords
ive used por15 products and I follow the destructions, as well the enviromentally safe products I use now through my wood flooring industry also contain them Isocyanates and other olys, yet the gov regulations allow it, as long as the (voc) volatile organic compound specs drop always wear a mask when using these products, I have been finding out in the past two years the damages they claim to cause.

Posted: September 8, 2007, 9:36 pm
by Greg D
Gotta watch chemicals period. We used to use a product in the water back in the day in the printing industry, Red Etch. If I am even get a drop on my skin now it will crack wide open a bleed like I cut it. Stuff has been pretty much outlawed now though. Problem is nothing, but nothing works better. Same goes with the alcohol we used to use, synthetic stuff is pure shit. A couple of the reasons I now drive a truck for a living. Funny thing is you should see some of the crap I have in my garage, lol.

Posted: September 8, 2007, 10:28 pm
by shawns fords
I almost forgot I need to pic my front end tomorrow also, that thing was por15 the entire front axel it semi gloss it came out sweet, I put 3 coats on it too, it wont ever rust again (Ihope) lol

Posted: September 9, 2007, 12:57 am
by Z-MAN
I learned the hard way and learned that it has to wear off. :shock: I sanded some of it off, but some of it I had to let wear off. I now where gloves and a respirator mask when I use it. Wife suggested I use gloves in the first place, but what does she know. :)

Z

[albumimg]2724[/albumimg]