Page 1 of 1
is there a diff in front clips
Posted: April 8, 2015, 8:25 pm
by econorod
was on us body looking at glass parts and they show one for a 1 ton and a 1/2 ton front clip.is there a diff between the two? im about to put a 62 cab and front clip from a 1ton on my 64 f100.wandering if i am going to run in to trouble?
Re: is there a diff in front clips
Posted: April 8, 2015, 8:33 pm
by LM14
I believe the wheel wells are larger on the 1 ton.
SPark
Re: is there a diff in front clips
Posted: April 8, 2015, 9:06 pm
by jamesdfo
1 ton & some? 4x4
1/2T
Re: is there a diff in front clips
Posted: April 9, 2015, 7:25 pm
by ICEMAN6166
jamesdfo wrote:1 ton & some? 4x4
and trucks with 17.5" and larger wheels
Re: is there a diff in front clips
Posted: April 28, 2015, 6:24 pm
by 64 litl un
Like was said wheel openings will be larger. It may not matter to you but the 64-66 roof line is slightly taller and squarer than 61-63 which tend to be lower and rounder. On 64 up you can see a style line on the roof above the doors. No line is visble on 61-3. Not a big deal unless you are concerned about keeping it correct for 64.