Page 1 of 1
Posted: September 11, 2007, 7:21 pm
by bigtrip460
1) What would YOU build?
2) What do you dislike about your current vehicle(s)?
1) it wouldnt be totally new, but I would like to do a galaxie with a nice budget.
2) I wish I had the budget to make it more reliable and do the body like I want. til that day I guess its a piece at a time.
Posted: September 11, 2007, 8:46 pm
by ezernut9mm
i would build a rust proof 64 shortie that cornered like it was on rails, stopped on a dime (and gave change), and took off like a rocket with no sqeeks or rattles while getting 50+ mpg with the a/c running.
i can't even begin to tell you what i hate about my current dd without writing a disertation, so i will leave it at that.
Posted: September 11, 2007, 9:18 pm
by Phil
My Uni is what I really want to do next. Its completely free from my usual "correct" mentality.
As a dream I think I'd like to try a concourse drag pac 70 Cyclone.
Or if we're really off the reservation an old Ferrari.
Or *yawn a Shelby Cobra
Current rides gripes
70 Fairlane should be faster, the paint isn't as nice as I'd like, it randomly stalls, needs a Detroit locker and a gear, Its an Automatic

.
68 Fairlane. Its an Ac vert and its still not valuable. Not my favorite styling-an aquired taste. Its an Automatic
62 Unibody. Its an Automatic
Its a gas hole
Seats ripped.
No room or cash to do it right.
No place to park it inside
Some idiot hauled gravel or cinderblocks in it.
The hacked dash for the radio
Grant Wheel
tailgate, nuff said
Posted: September 11, 2007, 9:30 pm
by 6166 Junkyard Dog
Short bed, Big Back Window, Mercury with the 61 Mercury grill in it, then I would take my little 427 stroker out of my 56 and go in that truck
Posted: September 11, 2007, 10:15 pm
by Ford4jack
1) What would YOU build?
I would go with a falcon type vehicle something easy to work on cheap on gas made from iron & steel
2) What do you LIKE about your current set of wheels?
Its a slick
3) What do you dislike about your current vehicle(s)?
The gas mileage
Dream car
55 Studebaker Speedster
Guess I just need to set the wayback machine to 1962

Posted: September 11, 2007, 10:41 pm
by Johnny Canuck
I want to buy the truck Tom is gonna build
Honestly I can't have just one vehicle... you can't do the things I want with only one, but one of those Aussie Utes with a supercharged 5.4 and left hand drive would come dam close, at 1/2 the price
http://www.ford.com.au/servlet/ContentS ... &c=DFYPage
For a cruiser truck I would probably build a short uni on a CV frame with a turbo Diesel of some sort that was light enough not to bottom out the suspension, or just go for a Roush V8
For a car, it is very hard to describe, but would look more like a Batmobile from one of the modern Batman movies than anything. Unlimited budget, unlimited resources, it would be a gas or steam turbine powered unit , capable of 0-sixty pulling 6 g's, and stick to any road like baby crap to a blanket.
For a Work truck? Tough-as-nails Bumpside longbox with a Powerstroke.
Of course being Canadian, I bet Doc was waiting for me to say I'd build a Ski-Doo. But, to be honest with you, there ain't enough snow down south here to run 'em. Useless as motorbikes.

Posted: September 12, 2007, 6:08 am
by jwh f-100
1) What would YOU build?
-First I would finish my '62
-My current "dream build" is

(no not a GM) is....
My fater has a 1941 or 42 (Can't remember) international pick up. I had thoughts of removing the cab and installing it on a International 3800 chassis (probably an old school bus as a donor) with either a 466 or a 360 with an allison auto transmission. Kinda like a prehistoric CTX. If I went with a 466 it would need to be hyd. brakes as the compressor sits very high and may cause clearence issues but may be able to go air brakes with the 360 as the compessor sits low. Most definately if it had air brakes it would have an air ride seat and BIG azz air horns. I would most likely need to do some stretching to the hood and fenders, I don't think the DT, the big radiator, and the charge air cooler would fit in the "42s engine compartment. Definatly stacks would be installed.I woud give it about a 200" wheel base with a flat bed. OR a shorter wheel base with a step side box or a box off one of those big army trailers.
2) What do you dislike about your current vehicle(s)?
What I don't like about my slick is the "cob job" the PO did to install the current engine.... I wish that much of it was OEM..Soon to be fixed though.
The Ranger - not 4x4 and not "truck enough" to tow
3) What do you LIKE about your current set of wheels?
I like that everything I don't like I can be changed. Maybe that's why we sometimes spend more time with the truck than the wife.
Good thread Doc!
Posted: September 12, 2007, 9:00 am
by DocDave
Here's a wierd one for ya
I've already got the design figured but just dont have the time and resources
A 3 wheeled (2 up front) motorcycle that leans into corners (all wheels lean) Very low totally enclosed single seat with maybe a 1200cc. I think it would be a hoot. (ya they already built one but it doesnt lean)
Failing that a Big back window Barracuda with a large Hemi
What I like about my truck is it's all mine, even the mistakes I make while building it
What I dont like is the mistakes I make while building it ( and the previous owners mess)
Dave
Posted: September 12, 2007, 9:59 am
by jwh f-100
If I went with a 466 it would need to be hyd. brakes as the compressor sits very high and may cause clearence issues but may be able to go air brakes with the 360 as the compessor sits low.
Where is my head. I'm glad my memory is the first thing I'm loosing.
I just looked at a couple vehicles in the yard. The 466 is the one with the lower mounted compressor so i guess it would be the best "air brake" option. I think both the 466 and the 360 would work well with hyd. brakes but the 360 is a much "shorter" engine so maybe the best bet for my "dream" build.
Maybe I am just nuts

what the heck would I do with a 10 ton 1942 International pick up?????
Posted: September 12, 2007, 11:45 am
by Johnny Canuck
DocDave wrote:Here's a wierd one for ya
I've already got the design figured but just dont have the time and resources
A 3 wheeled (2 up front) motorcycle that leans into corners (all wheels lean) Very low totally enclosed single seat with maybe a 1200cc. I think it would be a hoot. (ya they already built one but it doesnt lean)
Failing that a Big back window Barracuda with a large Hemi
What I like about my truck is it's all mine, even the mistakes I make while building it
What I dont like is the mistakes I make while building it ( and the previous owners mess)
Dave
um ... Dave...
http://hubpages.com/hub/CanAm_Spyder_3- ... Snowmobile
Posted: September 12, 2007, 2:50 pm
by Johnny Canuck
something like this here
http://www.teslamotors.com/performance/ ... torque.php
would make a p!$$pot full of money in this day and age.
The next pet rock IMO, as, unless you are generating your own wind power or photovoltaic power, you are still using electricity from a grid produced by burning coal. Now, if Tesla had REALLY been successful we wouldn't have to worry about that.
http://www.livevideo.com/video/Drachnid ... t-1-2.aspx
Posted: September 12, 2007, 6:29 pm
by Red62Uni
66 k code mustang fastback 4 speed i love every aspect. i would build thousands for me if that is all who wanted them.
Posted: September 12, 2007, 8:17 pm
by BigTim
The list is long and distinguished, but one thing I would really like to build is a 61 Starliner. Close to a perfect a body as Ford ever made IMO.
Then maybe a T Bolt clone.
Sleeper 2 door 79 Fairmont.
Several different years of Torinos.
32 3 window.
SWB Uni.
Posted: September 12, 2007, 8:20 pm
by DocDave
JC Ummmm NO That is one ugly machine but it might go over well here. I like the T-Rex style but with a leanable suspension, not a snowmobile conversion. They used to sell those front wheel conversions way back in the 70's and I hated them then.
[albumimg]2750[/albumimg] Nicer
[albumimg]2749[/albumimg] Ugly
Dave
Posted: September 12, 2007, 8:50 pm
by Johnny Canuck
Hey tried to be helpful Dave. Bikes have as much relevance to me as snow shoes do to a Panther.
Posted: September 12, 2007, 10:02 pm
by bigtrip460
If you could have your own vehicle manufacturing plant with unlimited resources,
what cars/trucks/motorcycles/..... wheelchairs would you build.
galaxies, torinos, falcons , fairlanes and maybe the 69/70 mustang. I would build them how they NEED to be done. 3 different levels for different people like better than stock, hot streeter, and full on badass!

Posted: September 12, 2007, 10:34 pm
by Greg D
I pretty much don't think in terms of new cars (the 05 GT is an anomoly for me).
A Torino GT, 68/69 - or 71 (I just like the 71 grill better than the 70).
1965 Mercury Comet, just a 2 door sedan will do it ain't gonna stay stock anyway.
1993 SSE Mustang - Yellow
Ford Model A sedan - traditional Hot Rod.
Finish the Uni first though.
Those are actually in reverse order though.....