Page 1 of 1

cutting a windshield

Posted: July 12, 2015, 8:28 pm
by Kid
Did a test cut on an old windshield today with a sandblaster, all went well. My media had moisture in it and it was clumping up and clogging the nozzle but it makes a nice cut. I wasnt to worried about damaging the glass as it was cracked anyway but I will tape the heck out of it and use a metal template on it when I cut the one I want to use. I am pretty happy the way it went as it was pretty smooth along the cut................Kid

Re: cutting a windshield

Posted: July 12, 2015, 9:06 pm
by grump
When it's time for the real cut all you need are NERVES OF STEEL! LOL

Re: cutting a windshield

Posted: July 14, 2015, 1:18 am
by mercuryv8
That's a good idea using the sandblaster! I used a cutoff wheel last time. It worked OK.

Nic

Re: cutting a windshield

Posted: July 14, 2015, 9:46 am
by unibody madness
Glad it worked well, more importantly, did it fit the opening?

Re: cutting a windshield

Posted: July 19, 2015, 8:14 pm
by Kid
Havent tried to cut one to fit yet, Just trying different ways to keep a line and protect the good glass I want to keep. Seems to me sandblasting is the easy way to cut glass. I think cutting a short line and then cutting to the top and losing that piece of cut glass will be the slowest but the best that way I wont have the extra glass hanging and possibly cracking what I want to keep. Going to bring the chop back home next weekend and that way I have it here to test fit the first one I cut, I have 5 for spares,LOL Hope to have a windshield in it before winter so I can drive it, the trip to Altoona last year with the plexi glass and 1 gallon gas can under the hood, (or where the hood should have been) was a trip I will remember,LOL.....................Kid