Page 1 of 1

Working on it again.

Posted: July 29, 2015, 9:52 pm
by Truckrat
I've been working on my 57 for a while now and finally got it back up
on wheels again. Did the reverse eye thing on the front springs. It dropped
about 2 inches which won't look like much but I don't have the engine back
in it yet either. Don't expect it will go down more than a couple more inches
but we'll see. The front tires on it are real short 15s so the gap still looks
kind of big between the tire and fender, but it is half of what it was with the
old springs in place.

The springs before (bottom) and after (top)

Image

Image

Image

Image

Still have a lot of work ahead of me but hope to have it back on the road by fall. TR

Re: Working on it again.

Posted: July 29, 2015, 10:38 pm
by orangeRcode
Lookin good Gary. Can't wait to see her running again. :cheers:

Re: Working on it again.

Posted: August 1, 2015, 10:12 am
by oldred
nice. that body style is one of the coolest that is finally starting to attract attention. i look on craigslist at least once a month for one for sale. the first one i looked at i was 22 and it was rusty. now i am 55 and lmc has parts.so i am looking again.

Re: Working on it again.

Posted: August 2, 2015, 2:05 am
by LM14
LMC parts for the fridges are awful. The sheetmetal panels (all of mine were Schott brand) are poor fits. The rubber is the same. Wasn't impressed by a single piece I got from them except the front bumper.

If you find a '57, make sure the grill and headlight parts are in great to perfect shape, none of it is reproduced and they go for serious money if you find a nice one. Another problem area is below the taillights but there is a guy making that panel now.

Image
Image

SPark

Re: Working on it again.

Posted: August 3, 2015, 12:00 am
by Truckrat
I like the tail lights you had in yours. What did you use? TR

Re: Working on it again.

Posted: August 3, 2015, 8:55 pm
by ICEMAN6166
good going Gary
always knew you had that but first pic i have seen
i remember Steves from ss

Re: Working on it again.

Posted: August 4, 2015, 2:22 pm
by Johnny Canuck
got a '59 hood on it Gary?

Re: Working on it again.

Posted: August 5, 2015, 1:25 am
by LM14
'50 Pontiac blue dots from Speedway. Easy to mount and fit pretty well.

Re: Working on it again.

Posted: August 5, 2015, 8:49 pm
by Truckrat
Thanks Steve, may have to get some of those.
Was up at Sid's yesterday and helped him move
some stuff to his new shop. Going to be a lot nicer than
the 100 year old building he has been in for 11 years.
I am looking for the bottle cap innie hubcaps for the
F100s and F250s if you hit any of the swapmeets and
yard sales around there. TR

Re: Working on it again.

Posted: August 5, 2015, 9:53 pm
by Sinc
Great looking truck! Nice project. Best of luck with it!

FYI: I have a set of Bottlecaps for an F-100. I'll see if I can drum up a photo or two (if you're interested).

Best regards…Sinc

Re: Working on it again.

Posted: August 6, 2015, 10:31 am
by Truckrat
Cool Bill, I am trying to gather up a good number of them.
Doesn't matter to me if they are F100 or F250s. Both work great.
Paint is not an issue, but just looking for them in good shape
without rust holes and perforations. Let me know, Bill.

Re: Working on it again.

Posted: August 6, 2015, 11:57 am
by jkimbrel65
Gary send me an address.I got a few

Mike

Re: Working on it again.

Posted: August 6, 2015, 11:59 am
by Sinc
Hi,

These are in pretty good shape, but not 100% perfect. They are good looking from about 5 feet away. Up close you can see some very tiny blemishes. They are powder coated argent and the lettering is laser-cut vinyl. It would probably be a good idea to clear coat them if you plan to use them on a daily driver.

Image

If you're interested, send an email to "sinc1 @ verizon dot net".

Cheers…Sinc