What pulley drives the power steering pump?
Posted: July 31, 2015, 10:36 pm
As I look for a donor truck, or parts package to get power steering for my 66 1/2 ton V8, some basic first questions come to mind. My truck has a a 2 groove crank pulley, a 2 groove alternator pulley, and a 3 groove fan pulley, all currently driven by 2 matching belts. The empty 3rd groove on the fan pulley is a little smaller that the other 2. Is this where the power steering pump would be driven from? Also, what model years of trucks will have the Saginaw gear and conversion parts I need? Are any parts below the Saginaw steering gear arm changed in this conversion, or are these common to both PS and manual? (Tie rod, Drag Link, ect.). Will a 3/4 ton donor truck have the parts I need for power steering conversion, or are these parts heavier or different?
I know that many will recommend that I swap in a later model disc brake assembly at the same time, and I may, but first I just want learn what power steering parts will fit where.
I know that many will recommend that I swap in a later model disc brake assembly at the same time, and I may, but first I just want learn what power steering parts will fit where.