Page 1 of 1

Np435 output shaft

Posted: September 2, 2015, 12:43 am
by trevor8
Hello everyone this is my first post. Thank you for this site. I have a 66 f100 shortbed with a newly built 390. My question is my truck snapped the output shaft on its np435 is it worth the money to try to replace the shaft or should I just find another one. If it is fixable how hard is it to complete.

Re: Np435 output shaft

Posted: September 2, 2015, 6:29 am
by bruceandersson
It is fixable assuming you can find a replacement output shaft. Its not too bad a fix as the output shaft comes out after removing the tailshaft housing. Its a faster fix to just replace it as you do not have to chase parts. If you had your location on your profile, someone local might have what you need.

Re: Np435 output shaft

Posted: September 2, 2015, 8:59 pm
by ICEMAN6166
welcome to slick 60s

i have heard of snapping the ears on the yoke but never the actual shaft

yoke is easy replacement, shaft a little more involved

you might be able to pick up a complete np435 reasonably.