Page 1 of 1

Track width

Posted: December 31, 2015, 12:06 pm
by Blackwaterforge
I am going to change the gearing in my rear differential.
I would like to go from a 4.10 open differential to a 3.54 power lock.
I know there is a discrepancy between the front and rear track widths.
Is it better to go with wider rear tires or use a later model rear end?
Thank You!

Re: Track width

Posted: December 31, 2015, 4:23 pm
by 6166 Junkyard Dog
I Would if it was mine go with say the 73-79 rear its a wider track but would also stabilize and make the truck handle better,, even thou mine is a F-100 my truck has the wider rear out of a 96 and mine handles real good ,, Only thing I would look at is tire clearance issues especially if loading the truck

Re: Track width

Posted: December 31, 2015, 5:50 pm
by Toyz
X2
Paul

Re: Track width

Posted: January 1, 2016, 12:43 pm
by Roger Carter
X3

I installed a '77 F-100 rear end under a '66 F-100 a few years back. Had to relocate the spring perches and shock brackets to make everything fit. As I remember the '77 was about 4" wider overall than the '66. 235-75x15" tires on stock steel wheels cleared, but just barely.

As I remember you have a F-250. Correct?
I believe the F-250 4x4 Dents had the same width frame as the Slicks. Seems using a F-250 Dent 4x4 rear axle would minimize and fab / relocation work.

Re: Track width

Posted: January 3, 2016, 5:11 pm
by Blackwaterforge
Thanks Guys!