Page 1 of 1
A couple 292 ??'s
Posted: January 6, 2016, 10:12 am
by Mr. Jones
Greetings all,
Thanks to everyone for the compliments on my 62 350....I'm wanting to get the 292 cleaned up and painted,don't know what color Ford used on their Y-Blocks.Pictures would help.Also did these engines use a double-belt water pump pulley?If so,anyone have one they'd part with?
Dan
Re: A couple 292 ??'s
Posted: January 6, 2016, 7:59 pm
by skidoorulz
Is it safe to assume this is going into a Slick? If so the entire engine was painted black and the valve covers were painted Ford red. As far as the pulley's my 64 had a single belt that ran the water pump and generator. Don't think power steering was an option and air was an aftermarket so I believe it would have a single belt.
Re: A couple 292 ??'s
Posted: January 7, 2016, 6:10 am
by Shadow
Re: A couple 292 ??'s
Posted: January 7, 2016, 9:33 am
by Mr. Jones
Dana,
Thanks for the pic.I was thinking the Y-blocks were an off red.....
Dan
Re: A couple 292 ??'s
Posted: January 7, 2016, 12:13 pm
by unibody madness
I have seen them:
black with ford red covers,
black with gold covers,
and red with black covers.
Just to be different mine is new ford gray with ford red covers.
Re: A couple 292 ??'s
Posted: January 7, 2016, 1:14 pm
by 62bigwindow
I pulled one out of a 61 F600 that was green. It looked to be original but after 50 years who is to say?
Re: A couple 292 ??'s
Posted: January 10, 2016, 9:41 am
by 64 f100
Power steering was an option. I believe Harris made it for Ford and it was still manufactured by them as a kit not to long ago. If, you want more pulleys long on the older larger Ford trucks . I know there were several options , but you have to buy a 2 or 3 shiv harmonic balancer as a general rule. Other things people may not know about the yblock, are that roller chain and gears were on the heavy duty 292 engines starting I believe in 56 as it was a B6 part number. One set on Evilbay at a bid price of 100$ . At least I think it was on Evilbay, may be on St. Louis craigslist. I've been all over the internet lately. Some pieces are available from different parts vendors also. I keep a NOS set on hand for my own engine and have a partial set also.
Rich
Re: A couple 292 ??'s
Posted: January 10, 2016, 10:11 am
by unibody madness
Dennis Carpenter sells the harmonic dual at a reasonable price.