Page 1 of 1
New Job in SOuth Carolina
Posted: September 19, 2007, 10:32 am
by banjopicker66
All, I have accepted a new job and will be relocating back home to Columbia, South Carolina!
I will be taking my Slick with me of course, and intend to get together with the SC and NC Slicksters.
The new job will start about 1 Oct. I will leave my family in MD until the house sells, and then move them down.
I am sure looking forward to this, and hope to improve my Slick eventually.
I'll keep you posted!
Slick things for sale will include:
460/429 complete external oil cooler setup
V-8 oil bath air cleaner
'76 brake pedal setup for disc brake upgrade
Rebuilt 3.50 9 inch rear chunk/punkin
Good '65-'66 hood spears for Custom Cab trim
I don't have nice body and trim parts, just working stuff that is functional.
I don't have a list in front of me of the things I can sell; e-mail me back if you want something, I may have it. banjopicker66 at hotmail dot see-oh-em.
Free to good home:
A couple 460/429 engine gasket sets (not inlcuding the valley pan, though.)
Posted: September 19, 2007, 10:59 am
by FORDBOYpete
Posted: September 19, 2007, 11:13 am
by Johnny Canuck

Yeeeehhhaaww!!
The South is gonna rise again!!*
*congratulations, John and Family

Posted: September 19, 2007, 12:02 pm
by Slick Fan
Congrats! Here's hoping things go well for you & the fam-damily.

Posted: September 19, 2007, 12:42 pm
by ICEMAN6166
Congrats, John.
i suppose this will end your tour of America to visit other members?
Posted: September 19, 2007, 3:03 pm
by banjopicker66
Brian, it may actually increase it! I will be working for a company that does IT audits for credit unions and banks, so I may get to tavel more.
The last 3 years I have not traveled as much, as I was assigned other duties. I supervised a team of analysts, sending them out more often than I went out myself.
Posted: September 19, 2007, 4:50 pm
by Greg D
Congrats on the new job & relocation, I know you must be very happy to be going back home. John, if your new tour brings you back this way let me know.
Posted: September 19, 2007, 7:04 pm
by FORDMANLCRACKEL
Congradulations and welcome back to the south where snow is measured in inches not feet, if ya have any at all.
when you come through North Carolina what rouet will you be taking. I live about a little over an hours drive from I95 to the east and an hour from Hwy 301. Hwy 17 runs right through Williamston, N.C. where i live. I would be glad to have ya stop by at my home or meet ya some where along the way. Paul Marrel and F-zilla live in this areea also.
Lonnie
Posted: September 19, 2007, 7:35 pm
by Paul Merrell
Come on down I'm right off I95 exit 145 doing the day. I work for the Kenworth Dealer and at night I live in Wilson. There are some guys in Charlotte check here
http://forums.carolinafords.org/index.p ... 11f69b9392 Hope to see you soon!
Posted: September 20, 2007, 4:40 am
by 66fordtrucknut
I for 1, will be sorry to see you leave, you've become a good friend but I know your heart is in Dixie. Be safe in your travels and keep in touch.
Charlie
Posted: September 20, 2007, 9:49 pm
by kid2
Paul, Are you a Salesman for KW. I hope to be looking for a W900A soon. ....................Kid
Posted: September 21, 2007, 9:51 am
by dotcentral
Hope you and the family will like it in SC. Like Paul said, there is carolinafords.org web site. We have workdays, do a lot of trading, selling of parts, swapping of ideas, etc.
I'm sending you a pm on 65-66 parts.
Posted: September 21, 2007, 11:03 am
by Paul Merrell
No I'm not a KW salesman I work on them. But I do know this you do not want to buy one with a Cat. It has to run only on Ultra low surfur fuel if you fill up one time and run both tanks out. The sulfur in the fuel and the high temp from the regeneration will cause sulfulic acid. And that causes the turbo to get acid on them and it eats into the parts.
Posted: September 21, 2007, 5:50 pm
by FORDMANLCRACKEL
And then Paul gets paid to fix your truck and spends the money on his Slick.
Lonnie
Posted: September 21, 2007, 7:49 pm
by kid2
I think you are talking about the New Cat Engines. I had a Pete with a C-12 in it several Years ago and it ran great but didn't have the old Clatterpillar sound. Had to be real carefull what you put in it for Additives cause it mesed up the Computer.I would like to find one with a 3406PC or DI. I have seen them things run on Kerosene and oil mixed together, ran out of fuel once and all I could find is 5 gallons of Kero and had a gallon of Oil in the side box and a old timer told me to mix the 2 and run it, it ran but not very well but got me to real fuel. I would buy a K-100 if I can't find a W-900A.................Kid
Posted: September 21, 2007, 8:47 pm
by Paul Merrell
Yes the new Cat 07 engines can't seem to keep it to get things right. In my opinion Cat has open Pandora's box. You cannot run these trucks out of fuel if so you lose one or two injectors until you have replaced them all. The clearance inside the injectors are so close and with the fuel having less lube mixture the injectors sieze. Kid what year truck are you looking for. Cooper Kenworth is who I work for and Cooper owns all the stores in N.C. I know a guy that has a farm and he has found some old trucks and he had us work on them. He has one that has a five by four transmission you know that has two sticks. I think its a 1980 W900
Posted: September 21, 2007, 8:50 pm
by GLindley
Best wishes on the move and new job John! I'm sure you'll fair well! You'll be a bit closer to coffeyville too!
Posted: September 21, 2007, 9:09 pm
by kid2
Paul, Send me a E-mail so we can discuss this further, I should not have hijacked some one elses thread. I drove a 79 EX W900A with a 3408 Cat and it had a 2 stick 5x4 behind it. I am looking for a older truck to haul local with when I am slow with the other things I am doing. my E-mail is
darrellreglin@gmail.com