CV vs Dakota vs Jag front end swap.
Posted: March 10, 2016, 8:09 pm
Hey guys so I've done some research on each of these swaps and I think I'm finally going to pull the trigger and go with the Crown Vic front end. I'm sure I'll catch a lot of heat for my choice. Everybody has there own preference and I definitely respect that. The Dakota swap looks really good and there are just as many Dakotas in junkyards as CVs but reading through all the builds it just seems like a drastic swap, kind of intimidating haha. Don't get me wrong I have faith in my welding but damn not sure about that. As far as the jag swap goes I feel like the crown Vic parts would be easier/cheaper to find.
But either way I have just one question when it comes to this swap and pretty much all these swaps honestly. I already have the part numbers for pretty much everything big that I'm going to need (such a common swap I guess it's pretty easy to piece together through everyone else's builds but I'm having a hard time when it comes to the brakes. Right now I have the regular 65 all drum master cylinder. Obviously that won't work. I plan on staying with manual brakes. I know I'll definitely need a combo valve to run rear drums and front disks. So with that being said I might have just answered my own question. I'm guessing I will need a disk brake master cylinder and combination valve? Brake systems have never been my strong point haha any insight on the swap in general would be great or if I'm making a mistake please let me know
But either way I have just one question when it comes to this swap and pretty much all these swaps honestly. I already have the part numbers for pretty much everything big that I'm going to need (such a common swap I guess it's pretty easy to piece together through everyone else's builds but I'm having a hard time when it comes to the brakes. Right now I have the regular 65 all drum master cylinder. Obviously that won't work. I plan on staying with manual brakes. I know I'll definitely need a combo valve to run rear drums and front disks. So with that being said I might have just answered my own question. I'm guessing I will need a disk brake master cylinder and combination valve? Brake systems have never been my strong point haha any insight on the swap in general would be great or if I'm making a mistake please let me know