Page 1 of 1

Where do the washer nozzels go????

Posted: March 23, 2016, 2:30 pm
by born4ford
I had to find a new hood for my '65 because the front of the original was rotted out. I ended up with a '64 and it fits well but Doesn't have holes for the windshield washer nozzles. You would think you could find that info by looking at pictures but who takes pictures looking straight down at the hood? I can get a general idea but would really like a precise location because if I set them wrong it will draw my eye and bug me for the rest of my life. (No, I am not anal, I'm enthuiastically detail oriented :D ).

Thanks to anyone willing to take a tape measure out to their '65 to find some measurements for me!

Julie

Re: Where do the washer nozzels go????

Posted: March 23, 2016, 2:37 pm
by BarnieTrk
Here ya go: viewtopic.php?f=1&t=35456

BarnieTrk

Re: Where do the washer nozzels go????

Posted: March 24, 2016, 8:47 am
by ICEMAN6166
interesting this comes up twice in a weeks time
measurements are in the link posted above

ford used a very thin gasket between the squirter and the top of the hood, i sent John some small o-rings with the set i mailed , have not heard if he used them or was able to find a tiny gasket

Re: Where do the washer nozzels go????

Posted: March 24, 2016, 9:48 am
by unibody madness
Brian, I used the o rings, only problem is you have to hold them with out any movement from above while tightening from below or they will Slide out from under.