Page 1 of 1
Clutch fork preference/help
Posted: March 26, 2016, 3:34 pm
by ThinLizzy13
I'm replacing the clutch behind my 352 with a 4 speed. The clutch fork looks kinda worn down. I have the later style fork and bellhousing that doesn't use the anti rattle spring, just has the clip. Will the ends of my fork being worn down present any issues? And is the later fork "better" in any way or just another way to skin a cat?

Re: Clutch fork preference/help
Posted: March 27, 2016, 8:41 am
by ICEMAN6166
my y block has a similar type fork though its not stamped steel with a ball in the bell housing and it uses a spring
i also have had the same type as yours on an fe and used a spring
i would not run without one
to me it makes no difference as to style, the fork if it gets too thin and wears thru will eat on the release bearing
you should be able to find a replacement in better shape
im not sure about availability of new ones, possibly they are still made
also not real sure if they are fe specific,but i dont think so.
Re: Clutch fork preference/help
Posted: March 27, 2016, 2:10 pm
by ThinLizzy13
Thanks Iceman. I can still get this style fork new from a couple different places. I'll save my other style fork/bellhousing for a rainy day.