Page 1 of 2
Posted: September 23, 2007, 5:30 pm
by Phil
Every style has its place. Ask my buddy Glenn what he would do with a stepside
glennz wrote:just purchased a 64 f100 stepside
http://s166.photobucket.com/albums/u96/ ... d%20truck/
purchased with intent of a drag project, back half, IFS front, cage, 545 big block ford, c-6, and as much juice as it takes me to get into the 9's
truck is in good condition
i own and operate a small hot rod shop in south east lower michigan
Dr. Z's Rod Shop, i have been racing and working on cars for near 25 years
at this point the only question i have is who has put an IFS in front of one of these trucks and who's kit was it, i do not feel safe taking the factory solid axle upto these speeds
thanks
glenn z
Posted: September 23, 2007, 5:50 pm
by northern
minus the fact that the short bed flaresides are harder to come by then the longbed stylesides.......
its true they done have the payload that the larger bed could carrie, but you also have the oppinion of the consomers.
Posted: September 23, 2007, 6:22 pm
by mikecarson
My 62 is a short Flareside. Carried 10 rolls of barb wire, 150 T-posts, and 10 6' cedar posts for a fence home from Corsicana, trip of 30 miles. Still had the 223, 3spd then.
Put a 5th wheel hitch in it, and logged 300.000 miles chasing back and forth, north and south, working contract aviation. Used up several 223/262 engines. Put in a 390, and put 150,000+ on that before I gave it a rest.
Pretty good shorty.
Re: Should all short stepsides be crushed ??
Posted: September 23, 2007, 6:26 pm
by Johnny Canuck
Doc Pepper wrote: In fact, when I was fat, I was so squeezed behind the wheel of a slick that I farted while driving but didn't hear the sound until I got out.
Thanx Doc. that was the funniest thing I heard today, and I live in Canada, where we are all funny. We export the guys who are NOT funny to you guys, and you call them Comedians. You should hear our politicians.. 1,000,000 laughs.
Is George Bush Canadian?
Posted: September 23, 2007, 7:06 pm
by Slick Fan
When I was a kid, I thought stepsides were just plain funny lookin'. Looks like Ford had a bunch of leftover beds from '55 F100's & decided to use 'em up! Nothing about the beds matched anything else on the truck. Then I saw one that someone slapped a 4x4 frame under

THAT looked cool!
As I creep ever nearer my golden years, they are finally growing on me. Would I buy one today? Sure, why not, stepsides needs some luvin' too, ya know.

Posted: September 23, 2007, 8:38 pm
by FORDMANLCRACKEL
Ya just have to stack the load higher thats all.
Lonnie
Re: Should all short stepsides be crushed ??
Posted: September 24, 2007, 1:03 am
by My65
Doc Pepper wrote: A short stepside would flip over faster than a beer drinking Canadian on a bicycle.
Now come on... we don't drive bicycles drunk... we drive snowmobiles! Although come to think of it, I did crash my son's scooter...

Besides we only sober up when we come down south and drink your beer
Guess who finally figured out the emoticons???
Re: Should all short stepsides be crushed ??
Posted: September 24, 2007, 11:59 am
by Macon ACE
Doc Pepper wrote: A short stepside would flip over faster than a beer drinking Canadian on a bicycle.
I don't get it. Why would a beer be drinking Canadian?
Posted: September 24, 2007, 12:18 pm
by My65
Posted: September 24, 2007, 12:20 pm
by ICEMAN6166
shortbeds of whatever style are just too short.
the flareside had an option for mounting a tire on the outside by using a bracket and having a fender with a divot or a bite taken out to accomodate the tire,
4x8 sheets of wood and sheetrock fit in a lwb flareside laying flat and closing the tailgate too.
they were quite useful to farmers and tradesman because the steps make it easy to get stuff out of the bed or have a couple guys standing on them for a short ride across a farmers field or jobsite.
Posted: September 24, 2007, 1:33 pm
by dotcentral
Seems like up until 1955 all trucks where basically all stepsides/flairsides, except for the sort of ute-looking cars with the small tacked-on truck beds. I think GM with the Cameo and whatever the GMC version was named were the first with the wide side bed, and Ford and Dodge quickly followed. Guess it's just evolution. Someone comes out with something, then you wonder how we got along without it. Power steering, disc brakes, etc.
I sort of remember that used to be stepsides/flairsides were cheaper to buy. I have seen a few older longbed flaresides in the scrap yards that were ex-city, state, military trucks. I always guessed because the were a little cheaper. I think Ford discontinued the flareside in the mid 70's for a few years, but brought it back because people wanted them.
I had an Uncle with a really nice 77 or there abouts shortbed flairside, 302 with the 4 speed o/d, it was pretty cheap brand new. He drove a log truck, so guess he wanted something small for around town.
could be wrong on some of this, just going from a sometimes cloudy memory.
Posted: September 24, 2007, 8:00 pm
by Garbz
Yes
All Chevrolet short bed stepside trucks should be crushed.
Now Ford flairsides.....NOPE...
Garbz
Posted: September 24, 2007, 8:17 pm
by 66 POJ
I used to hate bumped slicks, but here lately I grown fond of them.
They should live!
Posted: September 24, 2007, 8:43 pm
by Greg D
Doc, you can crush the one I have if it makes you feel better $200 and come and get it, lol.
Posted: September 24, 2007, 9:07 pm
by mikecarson
Doc Pepper wrote: We'll probably discover that all of them have cable TV with all the extra stations.
On a good day, we get 4 stations on the antenna, no cable (monopoly thinks they got me over a barrel?)
Posted: September 24, 2007, 11:41 pm
by northern
You know it almost sounds like some one is jealous that they done have a short bed stepside ( flareside )

Posted: September 25, 2007, 9:55 am
by Johnny Canuck
Doc is just out to win friends and influence people.
But I can see right thru his ploy.

Posted: September 25, 2007, 2:45 pm
by BigTim
Johnny Canuck wrote:Doc is just out to win friends and influence people.
But I can see right thru his ploy.

Well thought out plan.
Posted: September 25, 2007, 4:08 pm
by needmoretime
Now this post hit a nerve!
My STEPSIDE was originally bought for the following reasons in 1965. The owner needed a big engine (352) to pull a horse trailer. He wanted to get better mileage so he added a 3spd overdrive. The bed was used to haul stay/hay for the horses. He did not need much more than that.
I think the question you should be asking is why todays trucks are all pretty and yet the most refuse to use them because they don't want to dirty the bed and scratch them up. I think trucks today have lost there rough toughness and charachter. My buddy drove an 03 silverado thru a parking lot after a rain storm and lock it up.
Just my thoughts
Posted: September 25, 2007, 4:12 pm
by needmoretime
Ok,
I read the rest of the post
