Page 1 of 1
Posted: September 27, 2007, 6:35 pm
by 66 POJ

I finally agree with you on something!!!!!
Posted: September 27, 2007, 7:29 pm
by Slick Fan
66 POJ wrote:
I finally agree with you on something!!!!!

Me too!!!
Posted: September 27, 2007, 7:36 pm
by racerx1699
I fully agree Doc, I actually look the parts up on the internet and print them out before I go. Then I just hand them the part number and all they have to look up is the location.

Posted: September 27, 2007, 10:25 pm
by Greg D
The guys at the parts store I use are pretty good, funny thing is on older stuff they will occasionally call me with questions, lol. "Don't have a listing for a 62 Falcon lower control arm will the Mustang one fit?"
Posted: September 28, 2007, 10:50 am
by ICEMAN6166
this is why i hate most of the big chain parts stores.
the one i usually go to is not like that and the owner and employees know how to look my stuff up in the books because it most likely is not in the computer.
if they are busy i just look up the stuff in the book myself and write down the numbers.
i also refuse to buy parts not made in USA even though it costs more.
its worth checking out all the parts stores in your area to find the best one, likely they have mostly parts and very little fluff.
Posted: September 28, 2007, 12:33 pm
by bigtrip460
I hear you there! its like pulling teeth to see a variety of fan spacers or oil pumps at the local PITA parts stores. if you dont know exactly what you need and you have to look at it they should just pull a few parts and let you check them out, ya know?
Posted: September 28, 2007, 1:17 pm
by Johnny Canuck
One parts store I go to around here, Auto Value, has ONE guy, who I always call to make sure he is working, who has a damn clue.
They also have 6 other employees like the ones Doc described, and they are cloned thru all the other parts stores around here. Half of them are women that I am sure the boss hired for eye candy, couldn't find their own ass using both hands, most of 'em. You ask for a water pump gasket, you might as well have asked for an illidium Q-36 Space modulator, they can't tell the difference.
Posted: September 29, 2007, 4:00 pm
by MattsIASlickShop
Slick Fan wrote:66 POJ wrote:
I finally agree with you on something!!!!!

Me too!!!

WOW...me too!
Posted: September 29, 2007, 5:42 pm
by banjopicker66
I learn something new every day.
I didn't think Canada knew of Marvin's nefarious intents with Illudium PU-36!

Posted: October 2, 2007, 6:59 pm
by DocDave
So were do you think Marvin lives now that that rabbit messed things all up?
He moved to the planet that was in his way and settled in southern Alberta
I hear Elmer Fudd has an Ontario address, he bought the place beside Kurt Russel and Goldie Hawn's Old summer house.
Dave
Posted: October 2, 2007, 11:51 pm
by blackagatha
AW, cmon man. I knew the Ace Hardware was the most important place a LONG time ago.... Autozone Could have had the carriage bolts... but I would have NEVER gone there for said item.... Even if they did have them, they would likely be substandard crap...
Posted: October 3, 2007, 8:52 am
by My65
This thread almost reads like an addition to Jeff Foxworthy's "you might be a redneck"
-If you buy your truck paint next to the fence stain... you might be a redneck
-If most of your auto parts can also be used to fix your house... you might be a redneck
-If you refer to your summer cottage as the 'bed' of my truck... you might be a redneck
...or a Canadian...

Posted: October 3, 2007, 9:48 am
by Johnny Canuck
DocDave wrote:So were do you think Marvin lives now that that rabbit messed things all up?
He moved to the planet that was in his way and settled in southern Alberta
Dave
this explains a LOT!!!
