Page 1 of 1

Bit size for Ford seat belt fasteners...

Posted: October 1, 2007, 4:20 pm
by The Big M
Does anyone know what size of Torx bit I need to unbolt the seatbelts in my '87 Grand Marquis? I had one once, but I don't remember what size it was. I'm assuming that most or all Fords of the same vintage use similar fasteners.

Posted: October 1, 2007, 7:32 pm
by Phil
I am 75% sure its size 50

Posted: October 1, 2007, 7:36 pm
by DocDave
I'm 100% sure it's a T-50. If it's from a salt useing area you may go through a few with an impact gun. If you can use some penetrating oil from underneath before you try it helps alot. Buy a good one, The cheap ones are too hard of a temper and snap easily. The 70's were a T-45 and the newer ones are a T-55. The manufacturers just love to make us buy new tools every couple of years. Seriously what difference is there in the holding power of these bolts?
Dave

Posted: October 2, 2007, 9:14 am
by The Big M
It is indeed size 50. I picked up a $30 set of six from Canadian Tire, guaranteed for life. And now I get to test that guarantee, because I snapped the bit on the one bolt that I didn't spray with penetrating oil. And I was using a 3/8-drive ratchet, not an impact.

So I see what you mean about the hard temper, Dave... :lol:

Posted: October 2, 2007, 12:02 pm
by Z-MAN
Yup T-50

Posted: October 2, 2007, 12:30 pm
by Slick Fan
I've broken two Sears T50's off on my Crown Vic's bolts...the remaining portion of the last one is still sitting in the bolt head. :lol:
I bought a Snap-on torx for 23 stinkin' dollars...have yet to try it. :?

Posted: October 2, 2007, 1:34 pm
by DocDave
Ya but I think I've broke 2 Snap-ons in thirty years but anytime I buy a different brand It only lasts about a year before I run into a tough one so I buy another Snap-on.

You want to try and get a back seat belt out of a twenty year old GM after it's been sitting for 19 of them in a scrap yard :lol: in salty Ontario. I had to sometimes cut the seat frame or the whole floor section came up with a couple.

Dave