5.0 vs 5.7
Posted: September 17, 2016, 6:56 am
Ive decided to yank the 292/COM out of my 64 and put in a 302 or 351 with a C4. No interest in an AOD.
Which engine?
Both short blocks run about the same money. I want to run a roller cam.
I would do aluminum heads with a mild cam, 500 or 600cfm carb. Shoot for 8.5-9.0:1 compression.
Im keeping the 9in with 3.10 gears.
Im looking for a solid DD. I like the 5.0 with the shorter deck height, 8.2 vs 9.025 for the 351 and 9.77 for the Y. That gives me a little more room on the steering box. Gas mileage doesnt matter, I dont drive it enough for it be a cost issue.
Im also considering the R&P conversion, although Im not sold on it. It would be nice to get rid of the steering box and gain more exhaust options. Im not sure how the R&P works since its bolted to the axle and the axle moves. I want to keep my oem column shift.
Can/Should I use a 65+ transmission crossmember? It seems that will place the tailshaft at the proper height and position on the centerline.
I have no idea if the driveshaft will be the proper length.
Im guessing someone has already done this.
Which engine?
Both short blocks run about the same money. I want to run a roller cam.
I would do aluminum heads with a mild cam, 500 or 600cfm carb. Shoot for 8.5-9.0:1 compression.
Im keeping the 9in with 3.10 gears.
Im looking for a solid DD. I like the 5.0 with the shorter deck height, 8.2 vs 9.025 for the 351 and 9.77 for the Y. That gives me a little more room on the steering box. Gas mileage doesnt matter, I dont drive it enough for it be a cost issue.
Im also considering the R&P conversion, although Im not sold on it. It would be nice to get rid of the steering box and gain more exhaust options. Im not sure how the R&P works since its bolted to the axle and the axle moves. I want to keep my oem column shift.
Can/Should I use a 65+ transmission crossmember? It seems that will place the tailshaft at the proper height and position on the centerline.
I have no idea if the driveshaft will be the proper length.
Im guessing someone has already done this.