Just one of those days
Posted: October 18, 2016, 10:22 pm
Tonight was the first time in almost 3 weeks I had some free time to work on my truck. The only thing I got accomplished was unintentionally removing the rear axle and needless to say I'm very lucky I had the jack under it.
A few weeks ago I removed the u bolts and shocks in an attempt to prepare the rear suspension while I wait for all the little odds and ends for my front suspension. After removing these the rear axle was stuck to the leaf springs...I really mean stuck...I hit it with a sledge hammer in an attempt to free it up and nothing. Well noticed I still had to remove the parking brake cable
Fast forward to tonight.
First order of business I had to get that cable off. Well took off the drum hat and shined the light in and saw the cable wasn't attached to anything. Problem is it is completely stuck in the housing. In all honesty I don't have much experience with drum brakes so any suggestions on how to remove this would be great. Which brings me to the axle falling out the back haha. After I tried to get a screwdriver/pliers on the retaining clip inside the drum housing to push the cable back out the axle decided to free itself almost crushing my leg but luckily I had a jack under it, it was fully decompressed but the axle only dropped a few inches balancing perfectly on the jack. Shortly after that I gave up and made my 2nd attempt at making a patch panel for the most awkward hole ever. Failed at that too but I have a much better plan/pattern for my next go around.
All in all I got nothing accomplished except maybe knowledge of how not to do somethings.
Anyone else have some "how not to do things" stories or better yet how am I supposed to remove this broken parking cable?
A few weeks ago I removed the u bolts and shocks in an attempt to prepare the rear suspension while I wait for all the little odds and ends for my front suspension. After removing these the rear axle was stuck to the leaf springs...I really mean stuck...I hit it with a sledge hammer in an attempt to free it up and nothing. Well noticed I still had to remove the parking brake cable
Fast forward to tonight.
First order of business I had to get that cable off. Well took off the drum hat and shined the light in and saw the cable wasn't attached to anything. Problem is it is completely stuck in the housing. In all honesty I don't have much experience with drum brakes so any suggestions on how to remove this would be great. Which brings me to the axle falling out the back haha. After I tried to get a screwdriver/pliers on the retaining clip inside the drum housing to push the cable back out the axle decided to free itself almost crushing my leg but luckily I had a jack under it, it was fully decompressed but the axle only dropped a few inches balancing perfectly on the jack. Shortly after that I gave up and made my 2nd attempt at making a patch panel for the most awkward hole ever. Failed at that too but I have a much better plan/pattern for my next go around.
All in all I got nothing accomplished except maybe knowledge of how not to do somethings.
Anyone else have some "how not to do things" stories or better yet how am I supposed to remove this broken parking cable?