Page 1 of 1

Adavanced Adapters OD

Posted: December 14, 2016, 2:14 pm
by MN66
Has anyone used a Ranger overdrive unit from Advanced Adapters?

Apparently they can be made to work with my NP435 and provide .73 OD ratio and can handle 420 ft lbs of torque.

They are 7.5" deep and install between the bellhousing and the trans - I think the shift lever location would still work with my bench seat.

Here's a link to the install docs:

http://www.advanceadapters.com/images/c ... 0OD(1).pdf

Thanks,
Corey

Re: Adavanced Adapters OD

Posted: December 14, 2016, 5:02 pm
by 9Fingers
I am currently considering installing one of these in my project truck. I have read lots online about them and my concern is extra noise from the o.d. unit. I too am interested in what others with a ranger o.d. have to say about them.

Re: Adavanced Adapters OD

Posted: December 15, 2016, 10:24 am
by MN66
9Fingers wrote:I am currently considering installing one of these in my project truck. I have read lots online about them and my concern is extra noise from the o.d. unit. I too am interested in what others with a ranger o.d. have to say about them.
After doing some more research, it does seem like the main issue is gear whine/noise. I wonder if heavily sound deadening the floor and tunnel cover would make much difference?

Re: Adavanced Adapters OD

Posted: December 15, 2016, 10:44 am
by bruceandersson
or a louder radio....

Re: Adavanced Adapters OD

Posted: December 15, 2016, 11:14 am
by MN66
bruceandersson wrote:or a louder radio....
Shucks - I've got the radio delete option. Might could go with open headers. :wink:

Re: Adavanced Adapters OD

Posted: December 16, 2016, 10:46 am
by tomrooster
What does it cost? Tom

Re: Adavanced Adapters OD

Posted: December 16, 2016, 12:39 pm
by jamesdfo
I was also curious what this would cost, as I've seen used Gear Vendors Overdrives for (slightly) under a Thousand, and if you got the divorced style, other than having the driveshaft shortened (which would be necessary with the AA one as well), it should go in without much of a fight.....

James
tomrooster wrote:What does it cost? Tom

Re: Adavanced Adapters OD

Posted: December 16, 2016, 4:40 pm
by 9Fingers
New from the manufacturer, $1,624.

New from summit, $1,575.

I am going with a 300 straight six, np435 transmission and married np205 transfer case. I think this would be perfect for splitting gears with the 4 speed and keeping revs low for highway speeds.

Re: Adavanced Adapters OD

Posted: December 16, 2016, 4:52 pm
by Leeroy
There's a guy down this way that fitted one to a bronco, he complained about the noise also but if I recall some 'softer' gear oil helped. I'll try and dig up the thread.

Re: Adavanced Adapters OD

Posted: December 16, 2016, 7:46 pm
by Leeroy