here's what your Slick needs.....
Posted: October 4, 2007, 3:27 pm
yah, not for 10 G's
hack for 5 G's you can have the same motor build localy.
with well know and warantied parts...
Page 1 of 1
Posted: October 4, 2007, 4:45 pm
Posted: October 4, 2007, 5:22 pm
Posted: October 4, 2007, 6:14 pm
Damn! I sure wish I had shitloads of cash...
Posted: October 4, 2007, 10:11 pm
Posted: October 5, 2007, 12:23 am
Why piss about? if you are gonna get an engine, get an ENGINE
http://www.roushperformance.com/engines/engines.shtml
http://www.roushperformance.com/engines/engines.shtml
Posted: October 5, 2007, 2:16 am
Is it just me or didn't a Shelby GT500 have a 428 in it? I also thought the GT350's were the shelby mustangs with the 351 in them.
Posted: October 5, 2007, 2:45 am
I believe you are correct, though I cannot be certain... I believe that this guy's facade of knowledge is showing a little light through a big thin spot.
Posted: October 5, 2007, 8:14 am
Yes the Shelby GT500's had 428 police interceptor motors. There are rumours of a very few '67's with dealer installed 427'sMrEvil wrote:Is it just me or didn't a Shelby GT500 have a 428 in it? I also thought the GT350's were the shelby mustangs with the 351 in them.
the GT350's had 289's , then 302's (optional blower) and MAYBE the last ones, the 69's, (which didn't sell well so they rebadged the last of them as '70's) had 351's I am not certain. But it was the last ones, if any, that had 351's.
I looked around this thread on engines and could not figure out why you asked this question tho.. must have missed something..
Posted: October 5, 2007, 9:13 am
I think he asked because the ad calls it an "Eleanor" engine.
Posted: October 5, 2007, 9:50 am
The Eleanors that Unique build in Texas HAVE a 427 with the FE block that Shelby builds out of aluminum. Blown versions exceed 750 horse
Posted: October 5, 2007, 10:49 am
That's the kind I'd want in my Slick...750 horsies, juuuust right!Johnny Canuck wrote:The Eleanors that Unique build in Texas HAVE a 427 with the FE block that Shelby builds out of aluminum. Blown versions exceed 750 horse
Posted: October 5, 2007, 3:34 pm
heres whats going in mine . 351 w 30 over eagle rotating ass.crane cam,roller rockers rouch 200 heads,studded and pinned
[albumimg]2879[/albumimg]
[albumimg]2879[/albumimg]
Posted: October 6, 2007, 10:29 am
That's all fine & dandy...just chuck that Fram filter before you fire it up.yogo wrote:heres whats going in mine . 351 w 30 over eagle rotating ass.crane cam,roller rockers rouch 200 heads,studded and pinned
Friends don't let friends drive Fram.
Posted: October 8, 2007, 6:24 am
