Page 1 of 1

T86 bearing retainer

Posted: February 9, 2017, 11:22 pm
by 62bigwindow
I'm in the process of gathering parts to convert my car T86 OD to use in my unibody. I have found a NOS truck input shaft. But I'm coming up short trying to find the bearing retainer. Does anyone have one or can supply the part number for it. Thanks

Re: T86 bearing retainer

Posted: February 10, 2017, 7:38 am
by bruceandersson
You may be able to use the bearing retainer off of a 3spd. They look to be the same. I have a y-block 3spd and could measure it for you if you do not have one. These are a little more plentiful.

Re: T86 bearing retainer

Posted: February 10, 2017, 8:07 am
by shipwrecked
I bought my bearing retainer from here.

http://mmerlinn.com/catalog/gbeezy1/bw_ ... tm#default

Re: T86 bearing retainer

Posted: February 10, 2017, 10:20 am
by 62bigwindow
Thanks. I can't believe how hard it is to find one. There seems to be an endless supply of the Ford 3 speeds but not so much of the T86's. One last question. The input shaft I found says it's for a 223. I found another for a yblock. What is the difference between the two?