Page 1 of 1

New source for visor labels for 4x4s

Posted: March 9, 2017, 7:33 pm
by tomsrod
I spoke to a guy who can make very nice transfer case labels for the sun visor on 4x4s. The bottom photo shows his before he cleaned it up and the top one after. They cost $10. Send me a pm for his contact information. He expects a three to four week turn around and will place an order in the next few days. Pat
Image

Re: New source for visor labels for 4x4s

Posted: March 9, 2017, 8:36 pm
by slick4x4
Looks real good

Re: New source for visor labels for 4x4s

Posted: March 9, 2017, 9:50 pm
by MNTBUGGY
Does he have a pattern for a 1966 1/2 ton with just 2wd and 4wd ?

Re: New source for visor labels for 4x4s

Posted: March 10, 2017, 12:01 pm
by tomsrod
He only has the 2wd/4wd label for the two speed transfer cases. If someone has that one, he can probably recreate that too.

Re: New source for visor labels for 4x4s

Posted: March 11, 2017, 9:24 am
by MNTBUGGY
Pulled the visors out of pile of parts for the 66 last night and they only had a decal for the front lock out spicer hubs. Nothing for the transfer case shifter.

Re: New source for visor labels for 4x4s

Posted: March 11, 2017, 5:07 pm
by Michelle
I need a new gear shift pattern for my Big Slick, Wonder if he could make one like this one.

Image

Re: New source for visor labels for 4x4s

Posted: March 12, 2017, 2:42 am
by Leeroy
:shock:

I'm not sure I can follow that Michelle.

Re: New source for visor labels for 4x4s

Posted: March 12, 2017, 1:03 pm
by tomsrod
He fixed the wheel issue on the 4H. He can be contacted directly at: ldlevasseur111@comcast.net His name is David Levasseur. Michelle, I sent your photo to him.
Image

Re: New source for visor labels for 4x4s

Posted: March 12, 2017, 1:24 pm
by longcabjohn
I don't know if they still exist, but I got a lot of decal for skyliners from jim Osborn reproductions and I'm sure they had some for trucks.



Johnny

Re: New source for visor labels for 4x4s

Posted: March 12, 2017, 9:28 pm
by tomsrod
He can make one Michelle, but he needs the size in inches. Disregard the numbers outside the black box.
Image