driveline 63' Ford
Posted: March 18, 2017, 2:43 pm
I finally talked my dad into parting with his truck, that he purchased new in 63'. I grew up in this truck and I am in the process of putting it back on the road.
The truck has 3 on the tree transmission and I want to convert it to an automatic, I would like to keep it original but I have bad ankles and don't want to be shifting gears if I don't have to.
The current setup is a motor mount at the front of the engine and side mounts on the tranny, no tranny cross member, so if I install an automatic tranny can I mock up original setup and fab up some motor mounts for the side of the motor and install a tranny cross member for the new tranny keeping the pinion angle the same as original setup?.
I was also told you can't put a shifter on the floor for the original tranny, because of the linkage, is that true?
If I am able to install new tranny I want a new steering column, the problem with that is the steering column is attached to the steering box as one piece, I haven't found a steering box replacement available on the aftermarket, so I can do this.
Thanks for your help
James Braunwalder
The truck has 3 on the tree transmission and I want to convert it to an automatic, I would like to keep it original but I have bad ankles and don't want to be shifting gears if I don't have to.
The current setup is a motor mount at the front of the engine and side mounts on the tranny, no tranny cross member, so if I install an automatic tranny can I mock up original setup and fab up some motor mounts for the side of the motor and install a tranny cross member for the new tranny keeping the pinion angle the same as original setup?.
I was also told you can't put a shifter on the floor for the original tranny, because of the linkage, is that true?
If I am able to install new tranny I want a new steering column, the problem with that is the steering column is attached to the steering box as one piece, I haven't found a steering box replacement available on the aftermarket, so I can do this.
Thanks for your help
James Braunwalder