Page 1 of 1

Ford part number question

Posted: August 31, 2006, 9:25 am
by The Big M
Anyone know what the part number prefix EAA corresponds to (i.e. engine size, vehicle, year)? The number I'm specifically interested in is EAA-6507-C.

Posted: August 31, 2006, 11:27 am
by The Big M
Okay, after some quick research I've discovered that EAA corresponds to the 215 inline six.

So my next question is whether the intake valves from a 215 are interchangeable with those from a 223. Does anyone know offhand? Thanks.

Posted: September 1, 2006, 7:56 am
by 64 f100
Numbers in my book for exhaust are c3az 6507 a,b,c,and d. standard, .003 oversize, .015 oversize, and .030 oversize stems. Heads are 1.52 diameter, length is 5.02, and standard stem diameter is .3402.
Intake Head diamter is 1.79, and 5.02 length, standard stem diameter is .3420, part number coaz 6507 j,l,k, and m. J being standard, and the others being oversize as listed for the exhaust respectively. Hope this helps,

Rich

Posted: September 1, 2006, 9:45 am
by The Big M
Thanks for the confirmation. I found similar numbers. I also figured out that the intakes for the 215 are 1.65 head diameter, smaller than the 223 and therefore not interchangeable. Too bad, could have got a smokin' deal... :(

Posted: September 1, 2006, 10:53 am
by Johnny Canuck
Never heard of a 215 Ford. Then again I never claimed to be an inliner fan.
Learn something new every day I guess.

Posted: September 1, 2006, 4:27 pm
by 66fordtrucknut
Big m- Have you ever checked out the ford six performance website? Their vintage section covers the 215,223 and 262 6's, I have a 223 in my uni and great source of info on these engines.
Charlie

Posted: September 1, 2006, 5:27 pm
by The Big M
I have. I even registered at some point but I seem to have forgotten my username/password...

Oh well, I was able to find some info in the Dennis Carpenter catalogue.