Page 1 of 1
Speedometer adapter, and t98 questions
Posted: April 25, 2017, 8:31 am
by aj64f100390-292
So a few months back I ordered a NOS speedo gear with the smallest amount of teeth that I could for my t98s speedo gear, and now its still off when you get to 40mph..thats 45 mph..its a tad bit off before that but not by much. And it will be a while until I get a 5 speed od, so when i stick my rebuilt 292 in, so I want it to be right, especially for my odometer. So my t98 has a steel speedometer gear, my 62 f600 t98 tranny I have lying around uses the same type of speedo gear. Ill post pics later, how many tailshaft assemblys are there? Or the other option if an adapter, whats the best option there..
Re: Speedometer adapter, and t98 questions
Posted: April 25, 2017, 7:35 pm
by ras4434
I got tired of speedometer issues going from my COM to C-6. I changed out my gauges and gremlins started. I am going to a speedhut GPS speedometer next week. I will let folks know how it works out.
Re: Speedometer adapter, and t98 questions
Posted: April 26, 2017, 8:22 am
by aj64f100390-292
ras4434 wrote:I got tired of speedometer issues going from my COM to C-6. I changed out my gauges and gremlins started. I am going to a speedhut GPS speedometer next week. I will let folks know how it works out.
sounds interesting...wait whats a COM lol
Re: Speedometer adapter, and t98 questions
Posted: April 26, 2017, 2:28 pm
by bruceandersson
If you are reading low and have the smallest gear, you will need to eliminate friction in the speedometer or increase the magnetic charge in it. A good speedometer shop can take care of these things.
Re: Speedometer adapter, and t98 questions
Posted: April 29, 2017, 7:31 pm
by aj64f100390-292
bruceandersson wrote:If you are reading low and have the smallest gear, you will need to eliminate friction in the speedometer or increase the magnetic charge in it. A good speedometer shop can take care of these things.
Ok, thanks for the info