Page 1 of 1

clutch equalizer bar

Posted: April 29, 2018, 5:41 pm
by rwhistles
is there a difference in the v8 and straight 6 equalizer bar.

Re: clutch equalizer bar

Posted: April 29, 2018, 7:09 pm
by 9Fingers
The truck I'm working on is a 4x4 with a mid 70's 4x4 frame.

The truck had either 352 or 360 V8 and I swapped in a 300 straight six.

I used the same z-bar that was with the V8 when installing the 300.

The ball that screws into the block was already in the 300 and I've sold the V8 so I don't know if they are the same.

Re: clutch equalizer bar

Posted: April 29, 2018, 8:06 pm
by rwhistles
well as long as you used the same bar from the v8 on the 6 and it worked ok you answered my question. I did the same thing. 8 out 6 in but clutch seemed to be engaged or disengaged no in between. thought might be the equalizer bar had a different throw than a 6.