Page 1 of 1

First drive after diesel conversion

Posted: May 12, 2018, 6:54 pm
by Blackwaterforge
Not quite Road ready but getting there
https://youtu.be/XPUVUUO0--g

Re: First drive after diesel conversion

Posted: May 12, 2018, 10:26 pm
by ThinLizzy13
Awesome!

Re: First drive after diesel conversion

Posted: May 12, 2018, 10:26 pm
by charliemccraney
sweet

Re: First drive after diesel conversion

Posted: May 13, 2018, 12:00 am
by FarmMotorSports
Did you find an OD trans?
I'll let you know how the late 90's Dana 61 rear with 3.00 gears fits a slick.
It will definitely be wider than a stock slick Dana...

Re: First drive after diesel conversion

Posted: May 13, 2018, 6:11 am
by Blackwaterforge
Thanks guys!
I have a auxiliary transmission.
It is under/direct/over

Re: First drive after diesel conversion

Posted: May 13, 2018, 9:46 am
by chris401
Blackwaterforge wrote:Thanks guys!
I have a auxiliary transmission.
It is under/direct/over
Is it a Spicer 5831-C, E or?

Re: First drive after diesel conversion

Posted: May 13, 2018, 10:06 am
by Blackwaterforge
[/quote]Is it a Spicer 5831-C, E or?[/quote]
It is a Watson , Brown/Lipe
Built by Spicer
It is smaller than a 5831
It weighs about 110lbs

Re: First drive after diesel conversion

Posted: May 13, 2018, 2:29 pm
by chris401
Blackwaterforge wrote:
Is it a Spicer 5831-C, E or?[/quote]
It is a Watson , Brown/Lipe
Built by Spicer
It is smaller than a 5831
It weighs about 110lbs[/quote]Interested if the box makes road noise over the engine.

Re: First drive after diesel conversion

Posted: May 13, 2018, 4:00 pm
by Blackwaterforge
Right now the gearbox dose not make noise over the engine.
Neither does the radio or cell phone.
I have the carpet and transmission cover off and a two foot exhaust pipe from the engine

Re: First drive after diesel conversion

Posted: May 14, 2018, 4:35 pm
by chris401
Blackwaterforge wrote:Right now the gearbox dose not make noise over the engine.
Neither does the radio or cell phone.
I have the carpet and transmission cover off and a two foot exhaust pipe from the engine
I like the 1.79 3rd gear and the 4.10 axle where they are in my truck now. A 3.54 gear and 5431-C or E would keep it there when in low. I have not been actively looking yet but know the gears I need. Did you find some literature on your Watson?

Re: First drive after diesel conversion

Posted: May 17, 2018, 6:17 pm
by Alan Mclennan
:shock: boy that thing can climb up hill well ! , good work ! :clap: